[U-Boot] [PATCH v6 10/21] sabresd: i.MX6QP: Add initial dts support

[Jagan Teki <jagan@openedev.com>]

From: Jagan Teki <jagan@amarulasolutions.com>

Add initial devicetree support for i.MX6 Quad Plus Sabresd board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/cpu/armv7/mx6/Kconfig   |  3 +++
 board/freescale/mx6sabresd/spl.c | 12 ++++++++++++
 configs/mx6sabresd_spl_defconfig |  1 +
 3 files changed, 16 insertions(+)

diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index 0497fe0..42ac9b9 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -220,6 +220,9 @@ config TARGET_MX6SABRESD
 	select PINCTRL
 	select PINCTRL_IMX6
 	select SUPPORT_SPL
+	select FIT
+	select SPL_LOAD_FIT
+	select SPL_OF_LIBFDT
 
 config TARGET_MX6SLEVK
 	bool "mx6slevk"
diff --git a/board/freescale/mx6sabresd/spl.c b/board/freescale/mx6sabresd/spl.c
index 01d45ce..63847b3 100644
--- a/board/freescale/mx6sabresd/spl.c
+++ b/board/freescale/mx6sabresd/spl.c
@@ -147,6 +147,18 @@ int board_mmc_init(bd_t *bis)
 }
 #endif /* CONFIG_FSL_ESDHC */
 
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	if (is_mx6dqp() && !strcmp(name, "imx6qp-sabresd"))
+		return 0;
+	else if (is_mx6dq() && !strcmp(name, "imx6q-sabresd"))
+		return 0;
+	else
+		return -1;
+}
+#endif
+
 #ifdef CONFIG_SPL_OS_BOOT
 int spl_start_uboot(void)
 {
diff --git a/configs/mx6sabresd_spl_defconfig b/configs/mx6sabresd_spl_defconfig
index 33e84f0..ef02df1 100644
--- a/configs/mx6sabresd_spl_defconfig
+++ b/configs/mx6sabresd_spl_defconfig
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_VIDEO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
+CONFIG_OF_LIST="imx6qp-sabresd imx6q-sabresd"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
-- 
1.9.1