From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 16/21] i.MX6: Sabre: Move CONFIG_FEC_MXC to defconfigs
Date: Thu, 18 May 2017 16:30:26 +0530 [thread overview]
Message-ID: <1495105231-1723-17-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1495105231-1723-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Moved CONFIG_FEC_MXC from include/configs/mxsabresd.h
to imx6 sabresd and sabreauto defconfigs.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
configs/mx6dlsabreauto_defconfig | 2 ++
configs/mx6qpsabreauto_defconfig | 2 ++
configs/mx6qsabreauto_defconfig | 2 ++
configs/mx6sabresd_spl_defconfig | 1 +
include/configs/mx6sabre_common.h | 3 ++-
5 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig
index ba5ab8a..dae89fe 100644
--- a/configs/mx6dlsabreauto_defconfig
+++ b/configs/mx6dlsabreauto_defconfig
@@ -42,3 +42,5 @@ CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_OF_LIBFDT=y
+CONFIG_NETDEVICES=y
+CONFIG_FEC_MXC=y
diff --git a/configs/mx6qpsabreauto_defconfig b/configs/mx6qpsabreauto_defconfig
index 96a248e..2f95ab0 100644
--- a/configs/mx6qpsabreauto_defconfig
+++ b/configs/mx6qpsabreauto_defconfig
@@ -41,3 +41,5 @@ CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_OF_LIBFDT=y
+CONFIG_NETDEVICES=y
+CONFIG_FEC_MXC=y
diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig
index 015207d..20b39dc 100644
--- a/configs/mx6qsabreauto_defconfig
+++ b/configs/mx6qsabreauto_defconfig
@@ -42,3 +42,5 @@ CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_OF_LIBFDT=y
+CONFIG_NETDEVICES=y
+CONFIG_FEC_MXC=y
diff --git a/configs/mx6sabresd_spl_defconfig b/configs/mx6sabresd_spl_defconfig
index 58d0b4b..4dff0c3 100644
--- a/configs/mx6sabresd_spl_defconfig
+++ b/configs/mx6sabresd_spl_defconfig
@@ -53,3 +53,4 @@ CONFIG_OF_LIBFDT=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
CONFIG_SYS_I2C_MXC=y
+CONFIG_FEC_MXC=y
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 9b0fe5a..fbddb86 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -21,7 +21,7 @@
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_FEC_MXC
+#ifdef CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RGMII
@@ -30,6 +30,7 @@
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS
+#endif
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
--
1.9.1
next prev parent reply other threads:[~2017-05-18 11:00 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-18 11:00 [U-Boot] [PATCH v6 00/21] ARM: i.MX6: SabreSD: Add dts support Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 01/21] mx6sabresd: MAINTAINERS: Remove invalid defconfigs F: list Jagan Teki
2017-05-18 12:16 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 02/21] mx6sabresd: README: Fix to add space on dd command Jagan Teki
2017-05-18 12:17 ` Fabio Estevam
2017-05-18 15:41 ` Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 03/21] ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT Jagan Teki
2017-05-18 12:18 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 04/21] ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi Jagan Teki
2017-05-18 12:20 ` Fabio Estevam
2017-05-22 16:51 ` Jagan Teki
2017-05-22 17:01 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 05/21] ARM: dts: i.MX6: Add imx6q-sabresd.dts Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 06/21] ARM: dts: i.MX6: Add imx6dl-sabresd.dts Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 07/21] ARM: dts: i.MX6: Add imx6qp.dtsi Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 08/21] ARM: dts: i.MX6: Add imx6qp-sabresd.dts Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 09/21] sabresd: i.MX6Q: Add initial dts support Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 10/21] sabresd: i.MX6QP: " Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 11/21] SabreSD: i.MX6DL: " Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 12/21] SabreSD: Move CONFIG_SYS_I2C_MXC to defconfigs Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 13/21] SabreSD: Enable DM_I2C and DM_PMIC Jagan Teki
2017-05-18 12:22 ` Fabio Estevam
2017-05-18 12:41 ` Fabio Estevam
2017-05-22 14:38 ` Jagan Teki
2017-05-22 14:48 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 14/21] SabreSD: Enable CONFIG_DM_REGULATOR Jagan Teki
2017-05-18 12:23 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 15/21] SabreSD: Enable DM_USB Jagan Teki
2017-05-18 11:00 ` Jagan Teki [this message]
2017-05-18 11:00 ` [U-Boot] [PATCH v6 17/21] i.MX6: SabreSD: Enable DM_ETH Jagan Teki
2017-05-18 12:26 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 18/21] i.MX6: sabresd: Drop checkboard Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 19/21] i.MX6: SabreSD: Cleanup board code Jagan Teki
2017-05-18 11:00 ` [U-Boot] [PATCH v6 20/21] i.MX6: SabreSD: mx6sabresd_spl_defconfig => mx6sabresd_defconfig Jagan Teki
2017-05-18 12:27 ` Fabio Estevam
2017-05-18 11:00 ` [U-Boot] [PATCH v6 21/21] SabreSD: README: Update with dtb changes Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495105231-1723-17-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox