[U-Boot] [PATCH v7 00/17] ARM: i.MX6: SabreSD: Add dts support

Jagan Teki
2017-05-23T07:58:13Z

From: Jagan Teki <jagan@openedev.com>

Fabio, please add your changes on-top-of this series.

Compared to previous series, this series
- Removed 'Fabio' patch changes.
- Droped DM_I2C and DM_PMIC, since power driver need to chage dm
- Added phy-reset-gpio support for fec_mxc driver
- Added Linux merge tag details on dts patches

Changes for v6:
- rebase on u-boot-imx/master
- Droped DM_I2C and DM_PMIC changes
- Added phy-reset-gpio support for fec_mxc driver
- Added Linux merge tag details on dts patches
- Removed 'Fabio' patch changes.

Changes for v6:
- rebase on u-boot-imx/master
- Fixed comments from 'Fabio' in v5
- Droped file/directory rename changes patches
- Droped dm_gpio changes on board

Changes for v5:
- rebase on master
- removed SPL support for i.MX6DL SabreSD
- Add board_fit_config_name_match for SPL to fetch board dts
- Add imx6qdl_sabresd_spl_defconfig for common SPL support

Changes for v4:
- rebase on master
- Rename imx6[dl|q]_sabresd_spl_defconfig to imx6[dl|q]_sabresd_spl_defconfig
- Update README
- Move CONFIG_FEC_MXC to configs/mx6[dl|q|qp]sabreauto_defconfigs
- Add dts support for non-spl based defconfigs

Changes for v3:
- rebase on master
- Added patch 'ARM: i.MX6: sabresd: Cleanup board code'
- Added patch 'ARM: i.MX6DL: sabresd: Move DCD reginit on SPL'

Changes for v2:
- rebase on master
- Added new-patches.

Jagan Teki (17):
ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT
ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi
ARM: dts: i.MX6: Add imx6q-sabresd.dts
ARM: dts: i.MX6: Add imx6dl-sabresd.dts
ARM: dts: i.MX6: Add imx6qp.dtsi
ARM: dts: i.MX6: Add imx6qp-sabresd.dts
sabresd: i.MX6Q: Add initial dts support
sabresd: i.MX6QP: Add initial dts support
SabreSD: i.MX6DL: Add initial dts support
SabreSD: Move CONFIG_SYS_I2C_MXC to defconfigs
SabreSD: Enable CONFIG_DM_REGULATOR
SabreSD: Enable DM_USB
i.MX6: Sabre: Move CONFIG_FEC_MXC to defconfigs
net: fec_mxc: Add 'phy-reset-gpios' support
i.MX6: SabreSD: Enable DM_ETH
i.MX6: sabresd: Drop checkboard
i.MX6: SabreSD: Cleanup board code

arch/arm/cpu/armv7/mx6/Kconfig | 15 +-
arch/arm/dts/Makefile | 3 +
arch/arm/dts/imx6dl-sabresd.dts | 17 +
arch/arm/dts/imx6q-sabresd.dts | 25 +
arch/arm/dts/imx6qdl-sabresd.dtsi | 626 ++++++++++++++++++++++++
arch/arm/dts/imx6qp-sabresd.dts | 93 ++++
arch/arm/dts/imx6qp.dtsi | 149 ++++++
board/freescale/mx6sabresd/Makefile | 1 +
board/freescale/mx6sabresd/mx6sabresd.c | 834 ++++----------------------------
board/freescale/mx6sabresd/spl.c | 517 ++++++++++++++++++++
configs/mx6dlsabreauto_defconfig | 2 +
configs/mx6qpsabreauto_defconfig | 2 +
configs/mx6qsabreauto_defconfig | 2 +
configs/mx6sabresd_spl_defconfig | 7 +-
drivers/net/fec_mxc.c | 64 ++-
drivers/net/fec_mxc.h | 8 +
include/configs/mx6sabre_common.h | 3 +-
include/configs/mx6sabresd.h | 21 +-
include/netdev.h | 5 +
19 files changed, 1638 insertions(+), 756 deletions(-)
create mode 100644 arch/arm/dts/imx6dl-sabresd.dts
create mode 100644 arch/arm/dts/imx6q-sabresd.dts
create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi
create mode 100644 arch/arm/dts/imx6qp-sabresd.dts
create mode 100644 arch/arm/dts/imx6qp.dtsi
create mode 100644 board/freescale/mx6sabresd/spl.c

--
1.9.1