From: Bin Meng <bmeng.cn@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/20] usb: hub: Add 3.0 hub port status mask of 2.0 hub
Date: Fri, 16 Jun 2017 06:31:38 -0700 [thread overview]
Message-ID: <1497619909-29454-10-git-send-email-bmeng.cn@gmail.com> (raw)
In-Reply-To: <1497619909-29454-1-git-send-email-bmeng.cn@gmail.com>
USB 3.0 hub port status has different bit position regarding to
port power, port speed, etc. But others are the same as 2.0 hubs.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---
include/usb_defs.h | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/include/usb_defs.h b/include/usb_defs.h
index 608a0ca..6b4385a 100644
--- a/include/usb_defs.h
+++ b/include/usb_defs.h
@@ -262,12 +262,17 @@
/*
* Changes to wPortStatus bit field in USB 3.0
- * See USB 3.0 spec Table 10-11
+ * See USB 3.0 spec Table 10-10
*/
#define USB_SS_PORT_STAT_LINK_STATE 0x01e0
#define USB_SS_PORT_STAT_POWER 0x0200
#define USB_SS_PORT_STAT_SPEED 0x1c00
#define USB_SS_PORT_STAT_SPEED_5GBPS 0x0000
+/* Bits that are the same from USB 2.0 */
+#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \
+ USB_PORT_STAT_ENABLE | \
+ USB_PORT_STAT_OVERCURRENT | \
+ USB_PORT_STAT_RESET)
/* wPortChange bits */
#define USB_PORT_STAT_C_CONNECTION 0x0001
--
2.9.2
next prev parent reply other threads:[~2017-06-16 13:31 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-16 13:31 [U-Boot] [PATCH 00/20] usb: xhci: Fix USB xHCI support on Intel platform Bin Meng
2017-06-16 13:31 ` [U-Boot] [PATCH 01/20] usb: xhci: Remove incorrect comments for struct xhci_container_ctx Bin Meng
2017-06-17 3:43 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 02/20] usb: xhci: Correct command TRB 4th dword initialization Bin Meng
2017-06-17 3:43 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 03/20] usb: xhci: Initialize scratchpad buffer array and scratchpad buffers Bin Meng
2017-06-17 3:43 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 04/20] usb: xhci: Add input slot context in xhci_set_configuration() Bin Meng
2017-06-17 3:43 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 05/20] usb: hub: Update handling connect status/change in usb_scan_port() Bin Meng
2017-06-16 14:19 ` Marek Vasut
2017-06-20 15:18 ` Dinh Nguyen
2017-06-16 13:31 ` [U-Boot] [PATCH 06/20] usb: hub: Send correct wValue to get hub descriptor of a USB 3.0 hub Bin Meng
2017-06-17 3:43 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 07/20] usb: hub: Revise wLength for 'get port status' request Bin Meng
2017-06-17 3:43 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 08/20] usb: hub: Change USB hub descriptor to match USB 3.0 hubs Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` Bin Meng [this message]
2017-06-17 3:44 ` [U-Boot] [PATCH 09/20] usb: hub: Add 3.0 hub port status mask of 2.0 hub Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 10/20] usb: xhci: Change MAX_HC_PORTS to 255 Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 11/20] usb: xhci: Get rid of CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 12/20] configs: Remove CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS in all boards Bin Meng
2017-06-16 14:06 ` Bin Meng
2017-06-21 12:13 ` Stefan Roese
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 13/20] usb: ehci: Get rid of CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 14/20] configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards Bin Meng
2017-06-16 14:09 ` Bin Meng
2017-06-21 12:13 ` Stefan Roese
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 15/20] usb: cmd: Print actual packet size for super speed devices Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 16/20] usb: xhci: Convert CONFIG_USB_XHCI_PCI to Kconfig Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 17/20] x86: minnowmax: Configure GPIO pins to turn on USB ports VBUS Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-17 13:41 ` Bin Meng
2017-06-22 6:44 ` Bin Meng
2017-06-16 13:31 ` [U-Boot] [PATCH 18/20] x86: minnowmax: Add a environment variable for USB power-on delay Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 19/20] x86: minnowmax: Enable USB xHCI support Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-17 13:43 ` Bin Meng
2017-06-16 13:31 ` [U-Boot] [PATCH 20/20] x86: Remove CONFIG_USB_MAX_CONTROLLER_COUNT Bin Meng
2017-06-17 3:45 ` Simon Glass
2017-06-22 6:44 ` Bin Meng
2017-06-16 13:42 ` [U-Boot] [PATCH 00/20] usb: xhci: Fix USB xHCI support on Intel platform Bin Meng
2017-06-16 14:21 ` Marek Vasut
2017-06-16 14:29 ` Stefan Roese
2017-06-21 9:28 ` Stefan Roese
2017-06-21 10:24 ` Bin Meng
2017-06-21 12:07 ` Stefan Roese
2017-06-21 12:44 ` Bin Meng
2017-06-22 6:32 ` Bin Meng
2017-06-21 12:10 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1497619909-29454-10-git-send-email-bmeng.cn@gmail.com \
--to=bmeng.cn@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox