From: Bin Meng <bmeng.cn@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/8] nvme: Add NVM Express driver support
Date: Thu, 3 Aug 2017 02:30:55 -0700 [thread overview]
Message-ID: <1501752663-25088-1-git-send-email-bmeng.cn@gmail.com> (raw)
This series adds NVM Express driver support to U-Boot.
This series is based on previous RFC v2 patchset [1][2] done by
Zhikang Zhang and Wenbin Song, as well as Jon Nettleton's fixes
[3] on top of the RFC v1.
The patches are organized in a way that meets the requirement
of upstream. Jon's fixes were squashed/integrated with a proper
order in this series.
The original RFC driver was cleaned up a lot, to remove the
compilation limitation on non-ARMv8 architecture (including a
header file from armv8), drop the board_r.c modification, drop
unnecessary PCI configuration space initialization, add 32-bit
architecture support of readq/writeq operations, eliminate
compiler warnings, as well as coding convention clean up, plus
a fix to a bug that is exposed by QEMU platform.
Tested with an Intel SSD 750 series NVMe 400GB card, a Plextor
NVMe SSD M8Pe Series 256GB card, on Intel Crown Bay board, as
well as QEMU x86 emulation platform.
This series is available at u-boot-x86/nvme-working for testing.
[1] http://patchwork.ozlabs.org/patch/753088/
[2] http://patchwork.ozlabs.org/patch/753089/
[3] http://patchwork.ozlabs.org/patch/794909/
Bin Meng (2):
nvme: Handle zero Maximum Data Transfer Size (MDTS)
x86: qemu: Enable NVMe driver
Jon Nettleton (2):
nvme: Detect devices that are class Storage Express
nvme: Fix number of blocks detection
Zhikang Zhang (4):
dm: blk: part: Add UCLASS_NVME and IF_TYPE_NVME
nvme: Add NVM Express driver support
nvme: Add show routine to print detailed information
nvme: Add nvme commands
cmd/Kconfig | 7 +
cmd/Makefile | 1 +
cmd/nvme.c | 197 +++++++++++
configs/qemu-x86_defconfig | 1 +
disk/part.c | 6 +-
doc/README.nvme | 86 +++++
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/block/blk-uclass.c | 2 +
drivers/nvme/Kconfig | 12 +
drivers/nvme/Makefile | 7 +
drivers/nvme/nvme-uclass.c | 62 ++++
drivers/nvme/nvme.c | 860 +++++++++++++++++++++++++++++++++++++++++++++
drivers/nvme/nvme.h | 717 +++++++++++++++++++++++++++++++++++++
drivers/nvme/nvme_show.c | 127 +++++++
include/blk.h | 1 +
include/dm/uclass-id.h | 1 +
include/nvme.h | 82 +++++
include/pci_ids.h | 1 +
19 files changed, 2172 insertions(+), 1 deletion(-)
create mode 100644 cmd/nvme.c
create mode 100644 doc/README.nvme
create mode 100644 drivers/nvme/Kconfig
create mode 100644 drivers/nvme/Makefile
create mode 100644 drivers/nvme/nvme-uclass.c
create mode 100644 drivers/nvme/nvme.c
create mode 100644 drivers/nvme/nvme.h
create mode 100644 drivers/nvme/nvme_show.c
create mode 100644 include/nvme.h
--
2.9.2
next reply other threads:[~2017-08-03 9:30 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-03 9:30 Bin Meng [this message]
2017-08-03 9:30 ` [U-Boot] [PATCH 1/8] dm: blk: part: Add UCLASS_NVME and IF_TYPE_NVME Bin Meng
2017-08-10 1:30 ` Tom Rini
2017-08-14 0:07 ` [U-Boot] [U-Boot, " Tom Rini
2017-08-03 9:30 ` [U-Boot] [PATCH 2/8] nvme: Add NVM Express driver support Bin Meng
2017-08-10 1:30 ` Tom Rini
2017-08-14 0:07 ` [U-Boot] [U-Boot,2/8] " Tom Rini
2017-08-03 9:30 ` [U-Boot] [PATCH 3/8] nvme: Add show routine to print detailed information Bin Meng
2017-08-10 1:31 ` Tom Rini
2017-08-14 0:07 ` [U-Boot] [U-Boot, " Tom Rini
2017-08-03 9:30 ` [U-Boot] [PATCH 4/8] nvme: Add nvme commands Bin Meng
2017-08-10 1:31 ` Tom Rini
2017-08-14 0:08 ` [U-Boot] [U-Boot,4/8] " Tom Rini
2017-08-03 9:31 ` [U-Boot] [PATCH 5/8] nvme: Detect devices that are class Storage Express Bin Meng
2017-08-10 1:31 ` Tom Rini
2017-08-14 0:08 ` [U-Boot] [U-Boot, " Tom Rini
2017-08-03 9:31 ` [U-Boot] [PATCH 6/8] nvme: Fix number of blocks detection Bin Meng
2017-08-10 1:31 ` Tom Rini
2017-08-14 0:08 ` [U-Boot] [U-Boot,6/8] " Tom Rini
2017-08-03 9:31 ` [U-Boot] [PATCH 7/8] nvme: Handle zero Maximum Data Transfer Size (MDTS) Bin Meng
2017-08-10 1:31 ` Tom Rini
2017-08-14 0:08 ` [U-Boot] [U-Boot, " Tom Rini
2017-08-03 9:31 ` [U-Boot] [PATCH 8/8] x86: qemu: Enable NVMe driver Bin Meng
2017-08-10 1:31 ` Tom Rini
2017-08-14 0:08 ` [U-Boot] [U-Boot,8/8] " Tom Rini
2017-08-09 22:40 ` [U-Boot] [PATCH 0/8] nvme: Add NVM Express driver support Bin Meng
2017-08-10 1:31 ` Tom Rini
2017-08-10 1:49 ` Bin Meng
2017-08-10 1:56 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501752663-25088-1-git-send-email-bmeng.cn@gmail.com \
--to=bmeng.cn@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox