From mboxrd@z Thu Jan  1 00:00:00 1970
From: Chee, Tien Fong <tien.fong.chee@intel.com>
Date: Fri, 4 Aug 2017 05:37:18 +0000
Subject: [U-Boot] [PATCH 1/5] arm: socfpga: Add checking function on
 searching boot device
In-Reply-To: <4578c74d-f684-4b89-f1c4-4627eda9d06a@denx.de>
References: <1501498222-9422-1-git-send-email-tien.fong.chee@intel.com>
 <1501498222-9422-2-git-send-email-tien.fong.chee@intel.com>
 <1d6c1492-03d9-111a-739f-7d6b237e2f53@denx.de>
 <1501669306.4085.3.camel@intel.com>
 <4578c74d-f684-4b89-f1c4-4627eda9d06a@denx.de>
Message-ID: <1501825037.8947.3.camel@intel.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
To: u-boot@lists.denx.de

On Rab, 2017-08-02 at 23:32 +0200, Marek Vasut wrote:
> On 08/02/2017 12:21 PM, Chee, Tien Fong wrote:
> > 
> > On Isn, 2017-07-31 at 12:53 +0200, Marek Vasut wrote:
> > > 
> > > On 07/31/2017 12:50 PM, tien.fong.chee at intel.com wrote:
> > > > 
> > > > 
> > > > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > > > 
> > > > Function for checking boot device type, which is required for
> > > > locating
> > > > flash where U-boot image, FPGA design are stored.
> > > > 
> > > > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> > > > ---
> > > >  arch/arm/mach-socfpga/include/mach/misc.h |   19
> > > > +++++++++++++++++++
> > > >  arch/arm/mach-socfpga/misc_arria10.c      |   22
> > > > ++++++++++++++++++++++
> > > >  2 files changed, 41 insertions(+), 0 deletions(-)
> > > > 
> > > > diff --git a/arch/arm/mach-socfpga/include/mach/misc.h
> > > > b/arch/arm/mach-socfpga/include/mach/misc.h
> > > > index 0b65783..b219aac 100644
> > > > --- a/arch/arm/mach-socfpga/include/mach/misc.h
> > > > +++ b/arch/arm/mach-socfpga/include/mach/misc.h
> > > > @@ -14,6 +14,24 @@ struct bsel {
> > > >  	const char	*name;
> > > >  };
> > > >  
> > > > +enum {
> > > > +	BOOT_DEVICE_RAM,
> > > > +	BOOT_DEVICE_MMC1,
> > > > +	BOOT_DEVICE_MMC2,
> > > > +	BOOT_DEVICE_MMC2_2,
> > > > +	BOOT_DEVICE_NAND,
> > > > +	BOOT_DEVICE_ONENAND,
> > > > +	BOOT_DEVICE_NOR,
> > > > +	BOOT_DEVICE_UART,
> > > > +	BOOT_DEVICE_SPI,
> > > > +	BOOT_DEVICE_USB,
> > > > +	BOOT_DEVICE_SATA,
> > > > +	BOOT_DEVICE_I2C,
> > > > +	BOOT_DEVICE_BOARD,
> > > > +	BOOT_DEVICE_DFU,
> > > > +	BOOT_DEVICE_NONE
> > > Why do you have so many bootdevices here if half of them aren't
> > > supported/used ?
> > > 
> > Okay, i will reduce it, i refered this from spl.h
> > > 
> > > > 
> > > > 
> > > > +};
> > > > +
> > > >  extern struct bsel bsel_str[];
> > > >  
> > > >  #ifdef CONFIG_FPGA
> > > > @@ -26,6 +44,7 @@ static inline void socfpga_fpga_add(void) {}
> > > >  unsigned int dedicated_uart_com_port(const void *blob);
> > > >  unsigned int shared_uart_com_port(const void *blob);
> > > >  unsigned int uart_com_port(const void *blob);
> > > > +u32 boot_device(void);
> > > >  #endif
> > > >  
> > > >  #endif /* _MISC_H_ */
> > > > diff --git a/arch/arm/mach-socfpga/misc_arria10.c
> > > > b/arch/arm/mach-
> > > > socfpga/misc_arria10.c
> > > > index 9d751f6..069a0a6 100644
> > > > --- a/arch/arm/mach-socfpga/misc_arria10.c
> > > > +++ b/arch/arm/mach-socfpga/misc_arria10.c
> > > > @@ -235,6 +235,28 @@ unsigned int uart_com_port(const void
> > > > *blob)
> > > >  	return shared_uart_com_port(blob);
> > > >  }
> > > >  
> > > > +u32 boot_device(void)
> > > > +{
> > > > +	const u32 bsel = readl(&sysmgr_regs->bootinfo);
> > > > +
> > > > +	switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
> > > This looks very similar to what is on Gen5 ?
> > > 
> > I refered from  function spl_boot_device in spl.c . I copied the
> > function here, because U-boot also need it.
> So can the same code used for gen5 be recycled on gen10 ?
> 
Are you means SYSMGR_GET_BOOTINFO_BSEL? This is common #define shared
between gen5 and gen10. 
If you means boot_device function, then gen5 doesn't has this function.
Please correct me if i misunderstand your question.
> > 
> > > 
> > > > 
> > > > 
> > > > +	case 0x1:	/* FPGA (HPS2FPGA Bridge) */
> > > > +		return BOOT_DEVICE_RAM;
> > > > +	case 0x2:	/* NAND Flash (1.8V) */
> > > > +	case 0x3:	/* NAND Flash (3.0V) */
> > > > +		return BOOT_DEVICE_NAND;
> > > > +	case 0x4:	/* SD/MMC External Transceiver (1.8V)
> > > > */
> > > > +	case 0x5:	/* SD/MMC Internal Transceiver (3.0V)
> > > > */
> > > > +		return BOOT_DEVICE_MMC1;
> > > > +	case 0x6:	/* QSPI Flash (1.8V) */
> > > > +	case 0x7:	/* QSPI Flash (3.0V) */
> > > > +		return BOOT_DEVICE_SPI;
> > > > +	default:
> > > > +		printf("Invalid boot device (bsel=%08x)!\n",
> > > > bsel);
> > > > +		hang();
> > > > +	}
> > > > +}
> > > > +
> > > >  /*
> > > >   * Print CPU information
> > > >   */
> > > > 
>