public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Vincent P <vparatte@digger.ch>
To: u-boot@lists.denx.de
Subject: [U-Boot] Ethernet problem with u-boot for APF27
Date: Thu, 28 Sep 2017 00:31:43 -0700 (MST)	[thread overview]
Message-ID: <1506583903752-0.post@n7.nabble.com> (raw)

Hello everybody,

I have an APF27 and I have a problem with ethernet. I first did all the run
update correctly through a working tftp server (run update_uboot, run
update_dtb, run update_kernel and run update_rootfs). Then, when I restarted
the board, it was impossible to obtain files from tftp server. I can ping
from my computer to my virtual machin but not from my board to my virtual
machin. When I print the environement (printenv), the first line indicates:
addipargs=setenv bootargs ${bootargs}
p=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off

Moreover, the led on the swith and on the board for ethernet is not turned
on.
When I try run update_dtb for example, I have the following message:
FEC: Autonegotiation timeout
Using FEC device
TFTP from server 192.168.1.38; our IP address is 192.168.1.246
Filename 'apf27.dtb'.
Load address: 0xa000000
Loading: *
ARP Retry count exceeded; starting again

I tried with three different APF27 board that were working previously.
Therefore, it seems that it is a problem of the u-boot or a configuration
done later that turns off ethernet.

Does someone have any idea to solve this problem?
Thanks
Vincent



--
Sent from: http://u-boot.10912.n7.nabble.com/

             reply	other threads:[~2017-09-28  7:31 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-28  7:31 Vincent P [this message]
2017-09-28 13:00 ` [U-Boot] Ethernet problem with u-boot for APF27 Fabio Estevam
  -- strict thread matches above, loose matches on Subject: below --
2017-09-29 11:21 Vincent Paratte

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1506583903752-0.post@n7.nabble.com \
    --to=vparatte@digger.ch \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox