[U-Boot] [PATCH] ARC: HSDK: introduce CREG GPIO driver

[Alexey Brodkin <Alexey.Brodkin@synopsys.com>]

Hi Tom,

On Fri, 2017-10-13 at 09:46 -0400, Tom Rini wrote:
> On Fri, Oct 13, 2017 at 01:33:22PM +0000, Alexey Brodkin wrote:
> > 
> > Hi Tom,
> > 
> > On Fri, 2017-10-13 at 16:21 +0300, Eugeniy Paltsev wrote:
> > > 
> > > The HSDK can manage some pins via CREG registers block.
> > > 
> > > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> > > ---
> > >  MAINTAINERS                   |   6 +++
> > >  drivers/gpio/Kconfig          |   7 +++
> > >  drivers/gpio/Makefile         |   1 +
> > >  drivers/gpio/hsdk-creg-gpio.c | 109 ++++++++++++++++++++++++++++++++++++++++++
> > >  4 files changed, 123 insertions(+)
> > >  create mode 100644 drivers/gpio/hsdk-creg-gpio.c
> > 
> > I'm wondering if this one should go through my tree as this
> > is for one of our Synopsys ARC devboards or GPIO stuff usually
> > goes through some other tree?
> 
> The ARC tree is fine, but it's a bit late posting for this release.

So should I keep this one in "next" branch of my tree before v2017.11
gets cut?

-Alexey