From: "Ondřej Jirman" <megi@xff.cz>
To: u-boot@lists.denx.de
Subject: [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: set the default CPUx frequency of H5 to 816MHz
Date: Wed, 01 Nov 2017 03:10:24 +0100 [thread overview]
Message-ID: <1509502224.27172.3.camel@xff.cz> (raw)
In-Reply-To: <62fd699f8fa09a1ca360014cf8fa35b9@aosc.io>
Hi,
Icenowy Zheng píše v St 01. 11. 2017 v 08:31 +0800:
>
> And according to the Orange Pi PC2 and Prime schematics, they both
> start at 1.1V. (The Prime schematics even says "For H5 adjust
> VDD-CPUX to 1.1V).
>
Orange Pi PC2 starts at the same voltage as Orange Pi PC. That is at
1.308V.
It can be calculated from 0.6×(1+11.8÷10) as per the values of Ru1/Ru2
resistors in the schema. It is also my experience of working with these
boards and writing the sy8106a driver.
regards,
Ondrej
> >
> > There's no need to enforce a SoC-wide change.
> >
> > Maxime
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 850 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171101/5dd9748f/attachment.sig>
next prev parent reply other threads:[~2017-11-01 2:10 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-30 23:36 [U-Boot] [PATCH] sunxi: set the default CPUx frequency of H5 to 816MHz Icenowy Zheng
2017-10-31 7:57 ` Jagan Teki
2017-10-31 8:05 ` icenowy at aosc.io
2017-10-31 8:53 ` Jagan Teki
2017-10-31 9:08 ` Icenowy Zheng
2017-10-31 13:54 ` Maxime Ripard
2017-11-01 0:31 ` Icenowy Zheng
2017-11-01 2:10 ` Ondřej Jirman [this message]
2017-11-01 2:20 ` [U-Boot] [linux-sunxi] " Ondřej Jirman
2017-11-01 9:16 ` Jagan Teki
2017-11-02 13:56 ` [U-Boot] " Maxime Ripard
2017-11-03 8:51 ` Jagan Teki
2017-11-03 16:30 ` Maxime Ripard
2017-11-06 8:10 ` Jagan Teki
2017-12-02 16:27 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1509502224.27172.3.camel@xff.cz \
--to=megi@xff.cz \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox