From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 3/3] mx51: Select the ESDHC_A001 erratum
Date: Fri, 3 Nov 2017 13:40:10 -0200 [thread overview]
Message-ID: <1509723610-27434-3-git-send-email-festevam@gmail.com> (raw)
In-Reply-To: <1509723610-27434-1-git-send-email-festevam@gmail.com>
From: Fabio Estevam <fabio.estevam@nxp.com>
When a high speed card is connected to mx51evk the following error is seen:
U-Boot 2017.11-rc2 (Oct 18 2017 - 13:49:26 -0200)
CPU: Freescale i.MX51 rev3.0 at 800 MHz
Reset cause: POR
Board: MX51EVK
DRAM: 512 MiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - read failed, using default environment
In: serial
Out: serial
Err: serial
Net: FEC
Hit any key to stop autoboot: 0
=> saveenv
Saving Environment to MMC...
Writing to MMC(0)... failed
The root cause for the failure is the eSDHC-A001 erratum:
"eSDHC-A001 : Data timeout counter (SYSCTL[DTOCV]) is not reliable for
values of 0x4,0x8, and 0xC" that is listed
on some PowerArchitecture chips:
https://www.nxp.com/files-static/32bit/doc/errata/MPC8379ECE.pdf
Even though eSDHC-A001 is not documented on the i.MX51 errata document,
I have confirmed with the NXP design team that this erratum does affect
i.MX51, so fix the problem by selecting SYS_FSL_ERRATUM_ESDHC_A001
at SoC level.
The i.MX51 ts4800 board already selects this option, but it is better
to move this selection to the i.MX51 SoC level instead.
Successfully tested with a high speed SD card on a mx51evk board.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
---
Changes since v2:
- Put the U-Boot list on Cc.
Changes since v1:
- None
arch/arm/mach-imx/mx5/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig
index ef37c35..d96020d 100644
--- a/arch/arm/mach-imx/mx5/Kconfig
+++ b/arch/arm/mach-imx/mx5/Kconfig
@@ -6,6 +6,7 @@ config MX5
config MX51
bool
+ select SYS_FSL_ERRATUM_ESDHC_A001
config MX53
bool
@@ -52,7 +53,6 @@ config TARGET_MX53SMD
config TARGET_TS4800
bool "Support TS4800"
select MX51
- select SYS_FSL_ERRATUM_ESDHC_A001
config TARGET_USBARMORY
bool "Support USB armory"
--
2.7.4
next prev parent reply other threads:[~2017-11-03 15:40 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-03 15:40 [U-Boot] [PATCH v3 1/3] mx25: Move MX25 selection to Kconfig Fabio Estevam
2017-11-03 15:40 ` [U-Boot] [PATCH v3 2/3] mx25: Select the ESDHC_A001 erratum Fabio Estevam
2017-11-03 19:48 ` Otavio Salvador
2017-11-03 15:40 ` Fabio Estevam [this message]
2017-11-03 21:21 ` [U-Boot] [PATCH v3 1/3] mx25: Move MX25 selection to Kconfig Benoît Thébaudeau
2017-11-06 23:44 ` Fabio Estevam
2017-11-07 1:22 ` Tom Rini
2017-11-07 9:10 ` Stefano Babic
2017-11-10 20:19 ` Benoît Thébaudeau
2017-11-10 20:47 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1509723610-27434-3-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox