From: Jason Rush <jarush@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 4/5] dts: k2g: Clean-up indentation
Date: Thu, 16 Nov 2017 08:03:21 -0600 [thread overview]
Message-ID: <1510841002-22713-5-git-send-email-jarush@gmail.com> (raw)
In-Reply-To: <1510841002-22713-1-git-send-email-jarush@gmail.com>
Fix indentation of the QSPI node.
---
Changes for v4:
- Rebased
arch/arm/dts/keystone-k2g-evm.dts | 75 +++++++++++++++++++--------------------
1 file changed, 37 insertions(+), 38 deletions(-)
diff --git a/arch/arm/dts/keystone-k2g-evm.dts b/arch/arm/dts/keystone-k2g-evm.dts
index ba566a4..ad746c7 100644
--- a/arch/arm/dts/keystone-k2g-evm.dts
+++ b/arch/arm/dts/keystone-k2g-evm.dts
@@ -68,46 +68,45 @@
&qspi {
status = "okay";
- flash0: m25p80 at 0 {
- compatible = "s25fl512s","spi-flash";
- reg = <0>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>;
- spi-max-frequency = <96000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- cdns,tshsl-ns = <392>;
- cdns,tsd2d-ns = <392>;
- cdns,tchsh-ns = <100>;
- cdns,tslch-ns = <100>;
+ flash0: m25p80 at 0 {
+ compatible = "s25fl512s","spi-flash";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <96000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cdns,tshsl-ns = <392>;
+ cdns,tsd2d-ns = <392>;
+ cdns,tchsh-ns = <100>;
+ cdns,tslch-ns = <100>;
block-size = <18>;
-
- partition at 0 {
- label = "QSPI.u-boot-spl-os";
- reg = <0x00000000 0x00100000>;
- };
- partition at 1 {
- label = "QSPI.u-boot-env";
- reg = <0x00100000 0x00040000>;
- };
- partition at 2 {
- label = "QSPI.skern";
- reg = <0x00140000 0x0040000>;
- };
- partition at 3 {
- label = "QSPI.pmmc-firmware";
- reg = <0x00180000 0x0040000>;
- };
- partition at 4 {
- label = "QSPI.kernel";
- reg = <0x001C0000 0x0800000>;
- };
- partition at 5 {
- label = "QSPI.file-system";
- reg = <0x009C0000 0x3640000>;
- };
- };
+ partition at 0 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition at 1 {
+ label = "QSPI.u-boot-env";
+ reg = <0x00100000 0x00040000>;
+ };
+ partition at 2 {
+ label = "QSPI.skern";
+ reg = <0x00140000 0x0040000>;
+ };
+ partition at 3 {
+ label = "QSPI.pmmc-firmware";
+ reg = <0x00180000 0x0040000>;
+ };
+ partition at 4 {
+ label = "QSPI.kernel";
+ reg = <0x001C0000 0x0800000>;
+ };
+ partition at 5 {
+ label = "QSPI.file-system";
+ reg = <0x009C0000 0x3640000>;
+ };
+ };
};
&mmc0 {
--
2.1.4
next prev parent reply other threads:[~2017-11-16 14:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-16 14:03 [U-Boot] [PATCH v4 0/5] spi: cadence_spi: Adopt Linux DT bindings Jason Rush
2017-11-16 14:03 ` [U-Boot] [PATCH v4 1/5] spi: cadence_spi: Sync DT bindings with Linux Jason Rush
2017-11-16 14:03 ` [U-Boot] [PATCH v4 2/5] dts: " Jason Rush
2017-11-16 14:03 ` [U-Boot] [PATCH v4 3/5] config: cadence_spi: Remove defines read from DT Jason Rush
2017-11-16 14:03 ` Jason Rush [this message]
2017-11-16 14:03 ` [U-Boot] [PATCH v4 5/5] dts: cadence_spi: Update documentation for DT bindings Jason Rush
2017-11-20 9:30 ` [U-Boot] [PATCH v4 0/5] spi: cadence_spi: Adopt Linux " Vignesh R
2017-12-04 17:33 ` Vignesh R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1510841002-22713-5-git-send-email-jarush@gmail.com \
--to=jarush@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox