From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/3] mx6sxsabresd: Load the correct dtb for revA board
Date: Wed, 22 Nov 2017 11:15:27 -0200 [thread overview]
Message-ID: <1511356528-8005-2-git-send-email-festevam@gmail.com> (raw)
In-Reply-To: <1511356528-8005-1-git-send-email-festevam@gmail.com>
From: Fabio Estevam <fabio.estevam@nxp.com>
Currently only imx6sx-sdb.dtb is loaded, but if revA board is used the
correct dtb is imx6sx-sdb-reva.dtb, so make this possible.
While at it, remove an extra 'mmc dev'.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm/mach-imx/mx6/Kconfig | 1 +
board/freescale/mx6sxsabresd/mx6sxsabresd.c | 16 +++++++++++++++-
configs/mx6sxsabresd_defconfig | 1 +
include/configs/mx6sxsabresd.h | 8 ++++++--
4 files changed, 23 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 6f5a92a..52d9984 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -266,6 +266,7 @@ config TARGET_MX6SLLEVK
config TARGET_MX6SXSABRESD
bool "mx6sxsabresd"
+ select BOARD_LATE_INIT
select MX6SX
select SUPPORT_SPL
select DM
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 2aeef61..8a918a5 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -540,9 +540,23 @@ int board_init(void)
return 0;
}
+static bool is_reva(void)
+{
+ return (nxp_board_rev() == 1);
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ if (is_reva())
+ env_set("board_rev", "REVA");
+#endif
+ return 0;
+}
+
int checkboard(void)
{
- puts("Board: MX6SX SABRE SDB\n");
+ printf("Board: MX6SX SABRE SDB rev%s\n", nxp_board_rev_string());
return 0;
}
diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
index c4eb7ca..ac36a18 100644
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_TARGET_MX6SXSABRESD=y
# CONFIG_CMD_BMODE is not set
+CONFIG_NXP_BOARD_REVISION=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 5ef78a7..85b8601 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -43,6 +43,7 @@
#define UPDATE_M4_ENV ""
#endif
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
UPDATE_M4_ENV \
"script=boot.scr\0" \
@@ -104,10 +105,13 @@
"fi; " \
"else " \
"bootz; " \
- "fi;\0"
+ "fi;\0" \
+ "findfdt="\
+ "if test test $board_rev = REVA ; then " \
+ "setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \
#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev};" \
+ "run findfdt; " \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
--
2.7.4
next prev parent reply other threads:[~2017-11-22 13:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-22 13:15 [U-Boot] [PATCH 1/3] imx: Add a common way for detecting NXP boards revision Fabio Estevam
2017-11-22 13:15 ` Fabio Estevam [this message]
2017-11-22 14:01 ` [U-Boot] [PATCH 2/3] mx6sxsabresd: Load the correct dtb for revA board Stefano Babic
2017-11-23 9:08 ` Lukasz Majewski
2017-11-22 13:15 ` [U-Boot] [PATCH 3/3] mx6sxsabresd: Use PARTUUID to specify the rootfs location Fabio Estevam
2017-11-22 14:01 ` Stefano Babic
2017-11-23 9:08 ` Lukasz Majewski
2017-11-22 14:00 ` [U-Boot] [PATCH 1/3] imx: Add a common way for detecting NXP boards revision Stefano Babic
2017-11-23 9:08 ` Lukasz Majewski
2017-11-27 9:15 ` Stefano Babic
2017-11-27 10:28 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511356528-8005-2-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox