[U-Boot] [PATCH v3 4/4] dt-bindings: timer: Add andestech atcpit100 timer

Rick Chen
2017-11-28T02:29:23Z

Add a document to describe Andestech atcpit100 timer and
binding information.

Signed-off-by: rick <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
doc/device-tree-bindings/timer/atcpit100_timer.txt | 31 ++++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 doc/device-tree-bindings/timer/atcpit100_timer.txt

diff --git a/doc/device-tree-bindings/timer/atcpit100_timer.txt b/doc/device-tree-bindings/timer/atcpit100_timer.txt
new file mode 100644
index 0000000..620814e
--- /dev/null
+++ b/doc/device-tree-bindings/timer/atcpit100_timer.txt
@@ -0,0 +1,31 @@
+Andestech ATCPIT100 timer
+------------------------------------------------------------------
+ATCPIT100 is a generic IP block from Andes Technology, embedded in
+Andestech AE3XX, AE250 platforms and other designs.
+
+This timer is a set of compact multi-function timers, which can be
+used as pulse width modulators (PWM) as well as simple timers.
+
+It supports up to 4 PIT channels. Each PIT channel is a
+multi-function timer and provide the following usage scenarios:
+One 32-bit timer
+Two 16-bit timers
+Four 8-bit timers
+One 16-bit PWM
+One 16-bit timer and one 8-bit PWM
+Two 8-bit timer and one 8-bit PWM
+
+Required properties:
+- compatible : Should be "andestech,atcpit100"
+- reg : Address and length of the register set
+- interrupts : Reference to the timer interrupt
+- clock-frequency : The rate in HZ in input of the Andestech ATCPIT100 timer
+
+Examples:
+
+timer0: timer at f0400000 {
+ compatible = "andestech,atcpit100";
+ reg = <0xf0400000 0x1000>;
+ interrupts = <2 4>;
+ clock-frequency = <30000000>;
+}:
--
2.7.4