From mboxrd@z Thu Jan 1 00:00:00 1970 From: Faiz Abbas Date: Fri, 19 Jan 2018 15:32:48 +0530 Subject: [U-Boot] [PATCH 2/2] ARM: AM43XX: Call hw_data_init() again after relocation to update *ctrl In-Reply-To: <1516356168-16697-1-git-send-email-faiz_abbas@ti.com> References: <1516356168-16697-1-git-send-email-faiz_abbas@ti.com> Message-ID: <1516356168-16697-3-git-send-email-faiz_abbas@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de hw_data_init() is called before relocation to initialise hardware data. Since ctrl is initialized to OMAP_SRAM_SCRATCH_SYS_CTRL in arch/arm/mach-omap2/am33xx/hw_data.c, the pointer *ctrl will not be updated during relocation and will hold a stale value. Therefore call hw_data_init() again after relocation to reinitialize *ctrl. Signed-off-by: Faiz Abbas --- board/ti/am43xx/board.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index 2c417e7..16fa818 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -580,6 +580,11 @@ int board_init(void) gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; gpmc_init(); + /* + * Call this to initialize *ctrl again + */ + hw_data_init(); + /* Clear all important bits for DSS errata that may need to be tweaked*/ mreqprio_0 = readl(&cdev->mreqprio_0) & MREQPRIO_0_SAB_INIT1_MASK & MREQPRIO_0_SAB_INIT0_MASK; -- 2.7.4