From: Jagan Teki <jagannadh.teki@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 08/34] musb: sunxi: Add support for H3/H5A64
Date: Tue, 6 Feb 2018 19:55:38 +0530 [thread overview]
Message-ID: <1517927164-18197-9-git-send-email-jagan@amarulasolutions.com> (raw)
In-Reply-To: <1517927164-18197-1-git-send-email-jagan@amarulasolutions.com>
Like other Allwinner SoC, the H3/H5/A64 is missing the config register
from the musb hardware block. Use a known working value for it
like other SoC.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/usb/musb-new/musb_regs.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/musb-new/musb_regs.h b/drivers/usb/musb-new/musb_regs.h
index a3cc38e..a6a491a 100644
--- a/drivers/usb/musb-new/musb_regs.h
+++ b/drivers/usb/musb-new/musb_regs.h
@@ -432,7 +432,8 @@ static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
static inline u8 musb_read_configdata(void __iomem *mbase)
{
-#if defined CONFIG_MACH_SUN8I_A33 || defined CONFIG_MACH_SUN8I_A83T
+#if defined CONFIG_MACH_SUN8I_A33 || defined CONFIG_MACH_SUN8I_A83T || \
+ defined CONFIG_MACH_SUNXI_H3_H5 || defined CONFIG_MACH_SUN50I
/* <Sigh> allwinner saves a reg, and we need to hardcode this */
return 0xde;
#else
--
2.7.4
next prev parent reply other threads:[~2018-02-06 14:25 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-06 14:25 [U-Boot] [PATCH v4 00/34] phy: sunxi: Add Allwinner sun4i USB PHY Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 01/34] usb: sunxi: Simplify ccm reg base code Jagan Teki
2018-02-06 14:37 ` Marek Vasut
2018-02-11 10:39 ` Jagan Teki
2018-02-11 11:24 ` Marek Vasut
2018-02-06 14:25 ` [U-Boot] [PATCH v4 02/34] musb: sunxi: Add proper macros instead of numericals Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 03/34] musb: sunxi: Use simple way to fill musb_hdrc pdata Jagan Teki
2018-02-06 14:39 ` Marek Vasut
2018-02-11 10:44 ` Jagan Teki
2018-02-11 11:25 ` Marek Vasut
2018-02-06 14:25 ` [U-Boot] [PATCH v4 04/34] musb: sunxi: Add fifo config Jagan Teki
2018-02-06 14:41 ` Marek Vasut
2018-02-11 10:59 ` Jagan Teki
2018-02-11 11:29 ` Marek Vasut
2018-02-06 14:25 ` [U-Boot] [PATCH v4 05/34] sunxi: clock: Fix clock gating for H3/H5/A64 Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 06/34] musb: sunxi: Add OTG device clkgate and reset for H3/H5 Jagan Teki
2018-02-06 14:43 ` Marek Vasut
2018-02-06 14:25 ` [U-Boot] [PATCH v4 07/34] sunxi: clock: Fix OHCI clock gating " Jagan Teki
2018-02-06 14:25 ` Jagan Teki [this message]
2018-02-06 14:44 ` [U-Boot] [PATCH v4 08/34] musb: sunxi: Add support for H3/H5A64 Marek Vasut
2018-02-06 14:25 ` [U-Boot] [PATCH v4 09/34] phy: Add Allwinner A64 USB PHY driver Jagan Teki
2018-02-06 14:47 ` Marek Vasut
2018-02-06 14:25 ` [U-Boot] [PATCH v4 10/34] phy: sun4i-usb: Add id_detect and vbus_detect ops Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 11/34] phy: sun4i-usb: Add H3/H5 PHY config Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 12/34] phy: sun4i-usb: Add V3S " Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 13/34] phy: sun4i-usb: Add A83T USB " Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 14/34] phy: sun4i-usb: Add A10/A13/A20 " Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 15/34] phy: sun4i-usb: Add A31 " Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 16/34] phy: sun4i-usb: Add A33 USB " Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 17/34] phy: sun4i-usb: Add A23 " Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 18/34] device-tree-bindings: phy: Sync sun4i-usb-phy bindings Jagan Teki
2018-02-06 14:49 ` Marek Vasut
2018-02-06 14:25 ` [U-Boot] [PATCH v4 19/34] board: sunxi: Use generic-phy for board_usb_cable_connected Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 20/34] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 21/34] usb: sunxi: Switch to use generic-phy Jagan Teki
2018-02-06 14:51 ` Marek Vasut
2018-02-06 14:25 ` [U-Boot] [PATCH v4 22/34] sunxi: Drop legacy usb_phy.c Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 23/34] sunxi: h3: Sync OTG and HCI nodes from Linux DT Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 24/34] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 25/34] configs: bananapi-m64: Enable USB OTG peripheral mode Jagan Teki
2018-02-06 15:47 ` Maxime Ripard
2018-02-06 14:25 ` [U-Boot] [PATCH v4 26/34] ARM: dts: sun8i: a83t: Sync usbphy node from Linux Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 27/34] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes " Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 28/34] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg " Jagan Teki
2018-02-06 14:25 ` [U-Boot] [PATCH v4 29/34] configs: bananapi-m2-plus: Enable USB OTG peripheral mode Jagan Teki
2018-02-06 14:26 ` [U-Boot] [PATCH v4 30/34] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic Jagan Teki
2018-02-06 14:26 ` [U-Boot] [PATCH v4 31/34] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux Jagan Teki
2018-02-06 14:26 ` [U-Boot] [PATCH v4 32/34] configs: orangepi-pc2: Enable USB OTG peripheral mode Jagan Teki
2018-02-06 14:26 ` [U-Boot] [PATCH v4 33/34] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux Jagan Teki
2018-02-06 14:26 ` [U-Boot] [PATCH v4 34/34] configs: orangepi-prime: Enable USB OTG peripheral mode Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1517927164-18197-9-git-send-email-jagan@amarulasolutions.com \
--to=jagannadh.teki@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox