public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Dinh Nguyen <dinguyen@kernel.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/3] ARM64: stratix10: add reset manager includes
Date: Thu,  8 Mar 2018 21:39:25 -0600	[thread overview]
Message-ID: <1520566766-21786-3-git-send-email-dinguyen@kernel.org> (raw)
In-Reply-To: <1520566766-21786-1-git-send-email-dinguyen@kernel.org>

Pulled from linux v4.16-rc4.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
 include/dt-bindings/reset/altr,rst-mgr-s10.h | 97 ++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)
 create mode 100644 include/dt-bindings/reset/altr,rst-mgr-s10.h

diff --git a/include/dt-bindings/reset/altr,rst-mgr-s10.h b/include/dt-bindings/reset/altr,rst-mgr-s10.h
new file mode 100644
index 0000000..e3cae08
--- /dev/null
+++ b/include/dt-bindings/reset/altr,rst-mgr-s10.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2016-2018 Intel Corporation. All rights reserved
+ * Copyright (C) 2016 Altera Corporation. All rights reserved
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ * derived from Steffen Trumtrar's "altr,rst-mgr-a10.h"
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_S10_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_S10_H
+
+/* MPUMODRST */
+#define CPU0_RESET		0
+#define CPU1_RESET		1
+#define CPU2_RESET		2
+#define CPU3_RESET		3
+
+/* PER0MODRST */
+#define EMAC0_RESET		32
+#define EMAC1_RESET		33
+#define EMAC2_RESET		34
+#define USB0_RESET		35
+#define USB1_RESET		36
+#define NAND_RESET		37
+/* 38 is empty */
+#define SDMMC_RESET		39
+#define EMAC0_OCP_RESET		40
+#define EMAC1_OCP_RESET		41
+#define EMAC2_OCP_RESET		42
+#define USB0_OCP_RESET		43
+#define USB1_OCP_RESET		44
+#define NAND_OCP_RESET		45
+/* 46 is empty */
+#define SDMMC_OCP_RESET		47
+#define DMA_RESET		48
+#define SPIM0_RESET		49
+#define SPIM1_RESET		50
+#define SPIS0_RESET		51
+#define SPIS1_RESET		52
+#define DMA_OCP_RESET		53
+#define EMAC_PTP_RESET		54
+/* 55 is empty*/
+#define DMAIF0_RESET		56
+#define DMAIF1_RESET		57
+#define DMAIF2_RESET		58
+#define DMAIF3_RESET		59
+#define DMAIF4_RESET		60
+#define DMAIF5_RESET		61
+#define DMAIF6_RESET		62
+#define DMAIF7_RESET		63
+
+/* PER1MODRST */
+#define WATCHDOG0_RESET		64
+#define WATCHDOG1_RESET		65
+#define WATCHDOG2_RESET		66
+#define WATCHDOG3_RESET		67
+#define L4SYSTIMER0_RESET	68
+#define L4SYSTIMER1_RESET	69
+#define SPTIMER0_RESET		70
+#define SPTIMER1_RESET		71
+#define I2C0_RESET		72
+#define I2C1_RESET		73
+#define I2C2_RESET		74
+#define I2C3_RESET		75
+#define I2C4_RESET		76
+/* 77-79 is empty */
+#define UART0_RESET		80
+#define UART1_RESET		81
+/* 82-87 is empty */
+#define GPIO0_RESET		88
+#define GPIO1_RESET		89
+
+/* BRGMODRST */
+#define SOC2FPGA_RESET		96
+#define LWHPS2FPGA_RESET	97
+#define FPGA2SOC_RESET		98
+#define F2SSDRAM0_RESET		99
+#define F2SSDRAM1_RESET		100
+#define F2SSDRAM2_RESET		101
+#define DDRSCH_RESET		102
+
+/* COLDMODRST */
+#define CPUPO0_RESET		160
+#define CPUPO1_RESET		161
+#define CPUPO2_RESET		162
+#define CPUPO3_RESET		163
+/* 164-167 is empty */
+#define L2_RESET		168
+
+/* DBGMODRST */
+#define DBG_RESET		224
+#define CSDAP_RESET		225
+
+/* TAPMODRST */
+#define TAP_RESET		256
+
+#endif
-- 
2.7.4

  parent reply	other threads:[~2018-03-09  3:39 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-09  3:39 [U-Boot] [PATCH 0/3] ARM: stratix10: initial small patchset Dinh Nguyen
2018-03-09  3:39 ` [U-Boot] [PATCH 1/3] arm: socfpga: stratix10: Add base address map for Statix10 SoC Dinh Nguyen
2018-03-17  3:48   ` Marek Vasut
2018-03-09  3:39 ` Dinh Nguyen [this message]
2018-03-09  3:39 ` [U-Boot] [PATCH 3/3] ARM: dts: stratix10: Add base dtsi and devkit dts Dinh Nguyen
2018-03-17  3:49 ` [U-Boot] [PATCH 0/3] ARM: stratix10: initial small patchset Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1520566766-21786-3-git-send-email-dinguyen@kernel.org \
    --to=dinguyen@kernel.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox