From: "Heiko Stübner" <heiko@sntech.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 0/9] From Simon:
Date: Wed, 30 Nov 2016 20:50:40 +0100 [thread overview]
Message-ID: <1521456.019fzAgA66@diego> (raw)
In-Reply-To: <2824526.LfYMIHF6nQ@diego>
Hi Simon,
Am Mittwoch, 30. November 2016, 12:52:22 schrieb Heiko St?bner:
> Am Dienstag, 29. November 2016, 19:47:10 schrieb Simon Glass:
> > On 29 November 2016 at 16:45, Heiko St?bner <heiko@sntech.de> wrote:
> > > Am Sonntag, 27. November 2016, 10:01:40 schrieb Simon Glass:
> > >> This v3 patch is an update on Sjoerd's original v2 series from
> > >> Feburary.
> > >> I have dealt with the changes requested at the time, and adjusted the
> > >> way
> > >> that the speed change is handled.
> > >>
> > >> Tested on firefly-rk3288, rock2.
> > >
> > > Tested on a firefly as well. Though I get mixed results in my netboot
> > > environment. At 100MBit (manually limited) everything seems fine:
so assuming the 1000MBit issue comes from somewhere else, this series
Tested-by: Heiko Stuebner <heiko@sntech.de>
> > > ----------------------
> > > Speed: 100, full duplex
> > > BOOTP broadcast 1
> > > BOOTP broadcast 2
> > > DHCP client bound to address 192.168.140.58 (269 ms)
> > > Using ethernet at ff290000 device
> > > TFTP from server 192.168.140.1; our IP address is 192.168.140.58
> > > Filename 'hstuebner/firefly.vmlinuz'.
> > > Load address: 0x4000000
> > > Loading:
> > > #################################################################
> > >
> > > ###############################################################
> > > ##
> > > ###############################################################
> > > ##
> > > ###############################################################
> > > ##
> > > ###############################################################
> > > ##
> > > ###############################################################
> > > ##
> > > ###############################################################
> > > ##
> > > #########################
> > > 2.9 MiB/s
> > >
> > > done
> > > Bytes transferred = 7033483 (6b528b hex)
> > > ----------------------
> > >
> > > 5 out of 5 boots worked fine.
> > >
> > >
> > > but at 1000MHz I only get:
> > >
> > > ----------------------
> > > Speed: 1000, full duplex
> > > BOOTP broadcast 1
> > > BOOTP broadcast 2
> > > DHCP client bound to address 192.168.140.57 (270 ms)
> > > Using ethernet at ff290000 device
> > > TFTP from server 192.168.140.1; our IP address is 192.168.140.57
> > > Filename 'hstuebner/firefly.vmlinuz'.
> > > Load address: 0x4000000
> > > Loading: #####T #T #T ##T T #T #T T ####T #T ####
> > > Retry count exceeded; starting again
> > > ----------------------
> > >
> > > on 5 boots. 1 lonely boot also worked at 1000MBit for some unknown
> > > reason.
> > > I'm not sure if just my switch is some special snowflake (TL-SG1024 from
> > > TP- Link) or there is some other voodoo at work here.
> > >
> > > The rootfs over nfs seems to work fine on 1000MBit though.
> >
> > Yes I see some timeouts, although I don't think it is anything to do
> > with the driver conversion. Or does this not happen unless my patches
> > are applied?
>
> nope, really looks like some other parts are just not fast enough? And the
> setup of GRF and so on, look the same as in the linux kernel, so should be
> fine as well.
>
>
> Heiko
next prev parent reply other threads:[~2016-11-30 19:50 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-27 17:01 [U-Boot] [PATCH v3 0/9] From Simon: Simon Glass
2016-11-27 17:01 ` [U-Boot] [PATCH v3 1/9] net: designware: Export various functions/struct to allow subclassing Simon Glass
2016-11-29 22:28 ` Joe Hershberger
2016-11-27 17:01 ` [U-Boot] [PATCH v3 2/9] net: designware: Adjust dw_adjust_link() to return an error Simon Glass
2016-11-29 22:10 ` Joe Hershberger
2016-11-27 17:01 ` [U-Boot] [PATCH v3 3/9] net: designware: Split the link init into a separate function Simon Glass
2016-11-29 22:28 ` Joe Hershberger
2016-11-27 17:01 ` [U-Boot] [PATCH v3 4/9] net: designware: Export the operation functions Simon Glass
2016-11-29 22:31 ` Joe Hershberger
2016-11-27 17:01 ` [U-Boot] [PATCH v3 5/9] net: gmac_rk3288: Add RK3288 GMAC driver Simon Glass
2016-11-29 22:34 ` Joe Hershberger
2016-11-27 17:01 ` [U-Boot] [PATCH v3 6/9] rockchip: Enable networking support on rock2 and firefly Simon Glass
2016-11-27 17:01 ` [U-Boot] [PATCH v3 7/9] rockchip: evb-rk3339: Enable DHCP Simon Glass
2016-11-29 10:22 ` Heiko Stübner
2016-11-27 17:01 ` [U-Boot] [PATCH v3 8/9] rockchip: Add PXE and DHCP to the default boot targets Simon Glass
2016-11-27 17:01 ` [U-Boot] [PATCH v3 9/9] rockchip: Drop Ethernet from the TODO Simon Glass
2016-11-29 23:45 ` [U-Boot] [PATCH v3 0/9] From Simon: Heiko Stübner
2016-11-30 2:47 ` Simon Glass
2016-11-30 11:52 ` Heiko Stübner
2016-11-30 19:50 ` Heiko Stübner [this message]
2016-12-01 2:20 ` Simon Glass
2016-12-01 15:30 ` Heiko Stübner
2016-12-26 5:23 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521456.019fzAgA66@diego \
--to=heiko@sntech.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox