From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Kocialkowski Date: Mon, 26 Mar 2018 14:34:17 +0200 Subject: [U-Boot] [PATCH 3/3] sunxi: Add extra I2C bus support to Ainol AW1 defconfig In-Reply-To: <20180326111011.zcq2eemalmsvoenl@flea> References: <20180325123601.12125-1-contact@paulk.fr> <20180325123601.12125-3-contact@paulk.fr> <20180326111011.zcq2eemalmsvoenl@flea> Message-ID: <1522067657.5781.0.camel@bootlin.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, On Mon, 2018-03-26 at 13:10 +0200, Maxime Ripard wrote: > On Sun, Mar 25, 2018 at 02:36:01PM +0200, Paul Kocialkowski wrote: > > I2C bus 1 is used for the accelerometer and i2c bus 2 for the > > touchscreen of the device. While these are not supported in U-Boot, > > its > > command line can be used to access these peripherals. > > > > Signed-off-by: Paul Kocialkowski > > I'm not sure what the use case would be for U-Boot though. I guess you > can always enable it through menuconfig if you really want it, but > there's no real need for it in the default configuration. Fair enough, I'll drop this patch. Cheers, -- Paul Kocialkowski, Bootlin (formerly Free Electrons) Embedded Linux and kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 488 bytes Desc: This is a digitally signed message part URL: