From: Eugen Hristev <eugen.hristev@microchip.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 08/34] W1-EEPROM: add sandbox driver
Date: Tue, 18 Sep 2018 10:35:31 +0300 [thread overview]
Message-ID: <1537256157-18001-9-git-send-email-eugen.hristev@microchip.com> (raw)
In-Reply-To: <1537256157-18001-1-git-send-email-eugen.hristev@microchip.com>
Add a sandbox driver for a one wire EEPROM memory
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
drivers/w1-eeprom/Kconfig | 6 ++++
drivers/w1-eeprom/Makefile | 1 +
drivers/w1-eeprom/eep_sandbox.c | 61 +++++++++++++++++++++++++++++++++++++++++
include/w1.h | 1 +
4 files changed, 69 insertions(+)
create mode 100644 drivers/w1-eeprom/eep_sandbox.c
diff --git a/drivers/w1-eeprom/Kconfig b/drivers/w1-eeprom/Kconfig
index 20ec549..4b7f3c4 100644
--- a/drivers/w1-eeprom/Kconfig
+++ b/drivers/w1-eeprom/Kconfig
@@ -18,6 +18,12 @@ config W1_EEPROM_DS24XXX
help
Maxim DS24 EEPROMs 1-Wire EEPROM support
+config W1_EEPROM_SANDBOX
+ bool "Enable sandbox onewire EEPROM driver"
+ depends on W1
+ help
+ Sandbox driver for a onewire EEPROM memory
+
endif
endmenu
diff --git a/drivers/w1-eeprom/Makefile b/drivers/w1-eeprom/Makefile
index 3f4aa13..03cc4c8 100644
--- a/drivers/w1-eeprom/Makefile
+++ b/drivers/w1-eeprom/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_W1_EEPROM) += w1-eeprom-uclass.o
obj-$(CONFIG_W1_EEPROM_DS24XXX) += ds24xxx.o
+obj-$(CONFIG_W1_EEPROM_SANDBOX) += eep_sandbox.o
diff --git a/drivers/w1-eeprom/eep_sandbox.c b/drivers/w1-eeprom/eep_sandbox.c
new file mode 100644
index 0000000..27c7f9f
--- /dev/null
+++ b/drivers/w1-eeprom/eep_sandbox.c
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (c) 2018 Microchip Technology, Inc.
+ *
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <dm.h>
+#include <w1-eeprom.h>
+#include <w1.h>
+
+#define W1_F2D_READ_EEPROM 0xf0
+
+#define EEP_SANDBOX_SAMPLE_MEM "this is a sample EEPROM memory string."
+
+static int eep_sandbox_read_buf(struct udevice *dev, unsigned int offset,
+ u8 *buf, unsigned int count)
+{
+ /* do not allow to copy more than our maximum sample string */
+ if (offset + count < strlen(EEP_SANDBOX_SAMPLE_MEM)) {
+ offset = 0;
+ count = strlen(EEP_SANDBOX_SAMPLE_MEM);
+ }
+ strncpy((char *)buf, EEP_SANDBOX_SAMPLE_MEM, count);
+
+ /*
+ * in case the w1 subsystem uses some different kind of sandbox testing,
+ * like randomized gpio values , we take the buffer from there
+ */
+
+ w1_reset_select(dev);
+
+ w1_write_byte(dev, W1_F2D_READ_EEPROM);
+ w1_write_byte(dev, offset & 0xff);
+ w1_write_byte(dev, offset >> 8);
+
+ w1_read_buf(dev, buf, count);
+
+ /*
+ * even if read buf from w1 fails, return success as we hardcoded
+ * the buffer.
+ */
+ return 0;
+}
+
+static const struct w1_eeprom_ops eep_sandbox_ops = {
+ .read_buf = eep_sandbox_read_buf,
+};
+
+static const struct udevice_id eep_sandbox_id[] = {
+ { .compatible = "sandbox,w1-eeprom", .data = W1_FAMILY_EEP_SANDBOX },
+ { },
+};
+
+U_BOOT_DRIVER(eep_sandbox) = {
+ .name = "eep_sandbox",
+ .id = UCLASS_W1_EEPROM,
+ .of_match = eep_sandbox_id,
+ .ops = &eep_sandbox_ops,
+};
diff --git a/include/w1.h b/include/w1.h
index b36e0f8..399177a 100644
--- a/include/w1.h
+++ b/include/w1.h
@@ -12,6 +12,7 @@
#define W1_FAMILY_DS24B33 0x23
#define W1_FAMILY_DS2431 0x2d
+#define W1_FAMILY_EEP_SANDBOX 0xfe
struct w1_device {
u64 id;
--
2.7.4
next prev parent reply other threads:[~2018-09-18 7:35 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-18 7:35 [U-Boot] [PATCH v4 00/34] Add support for 1wire protocol and 1wire eeproms Eugen Hristev
2018-09-18 7:35 ` [U-Boot] [PATCH v4 01/34] w1: Add 1-Wire uclass Eugen Hristev
2018-09-29 15:44 ` [U-Boot] [U-Boot,v4,01/34] " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 02/34] w1: Add 1-Wire gpio driver Eugen Hristev
2018-09-29 15:44 ` [U-Boot] [U-Boot,v4,02/34] " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 03/34] dt-bindings: W1: w1-gpio: added bindings for w1-gpio Eugen Hristev
2018-09-29 15:44 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 04/34] W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs Eugen Hristev
2018-09-29 15:44 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 05/34] w1: identify devices with w1-eeprom uclass Eugen Hristev
2018-09-29 15:44 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 06/34] W1-EEPROM: add support for Maxim DS24 eeprom families Eugen Hristev
2018-09-29 15:44 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 07/34] dt-bindings: w1-eeprom: ds24xxx: create bindings Eugen Hristev
2018-09-29 15:44 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` Eugen Hristev [this message]
2018-09-29 15:45 ` [U-Boot] [U-Boot,v4,08/34] W1-EEPROM: add sandbox driver Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 09/34] dt-bindings: w1-eeprom: eep_sandbox: create bindings Eugen Hristev
2018-09-29 15:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 10/34] w1: add command for onewire protocol Eugen Hristev
2018-09-29 15:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 11/34] pinctrl: sandbox: add gpio onewire w1 group Eugen Hristev
2018-09-29 15:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 12/34] sandbox: DTS: w1: add node for one wire interface on GPIO Eugen Hristev
2018-09-29 15:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 13/34] configs: sandbox: add onewire w1 and sandbox eeprom Eugen Hristev
2018-09-29 15:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 14/34] configs: sama5d2_xplained: add onewire and eeprom drivers Eugen Hristev
2018-09-29 15:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 15/34] configs: sama5d3_xplained: " Eugen Hristev
2018-09-29 15:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 16/34] configs: sama5d27_som1_ek: " Eugen Hristev
2018-09-29 15:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 17/34] configs: sama5d2_ptc_ek: " Eugen Hristev
2018-09-29 15:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 18/34] configs: sama5d4_xplained: " Eugen Hristev
2018-09-29 15:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 19/34] board: atmel: add support for pda detection Eugen Hristev
2018-09-29 15:45 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 20/34] board: sama5d2_xplained: add pda detect call at init time Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 21/34] board: sama5d3_xplained: " Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 22/34] board: sama5d27_som1_ek: " Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 23/34] board: sama5d2_ptc_ek: " Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 24/34] board: sama5d4_xplained: " Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 25/34] configs: sama5d2_xplained: add fdt overlay support Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 26/34] configs: sama5d3_xplained: " Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 27/34] configs: sama5d2_ptc_ek: " Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 28/34] configs: sama5d27_som1_ek: " Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 29/34] configs: sama5d4_xplained: " Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 30/34] ARM: dts: at91: sama5d2_xplained: add onewire connector for LCD eeprom Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 31/34] ARM: dts: at91: sama5d3_xplained: " Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 32/34] ARM: dts: at91: sama5d27_som1_ek: " Eugen Hristev
2018-09-29 15:46 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 33/34] ARM: dts: at91: sama5d2_ptc: " Eugen Hristev
2018-09-29 15:47 ` [U-Boot] [U-Boot, v4, " Tom Rini
2018-09-18 7:35 ` [U-Boot] [PATCH v4 34/34] ARM: dts: at91: sama5d4_xplained: " Eugen Hristev
2018-09-29 15:47 ` [U-Boot] [U-Boot, v4, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1537256157-18001-9-git-send-email-eugen.hristev@microchip.com \
--to=eugen.hristev@microchip.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox