* [U-Boot] Building U-Boot for Digilent Zybo Z7
@ 2018-10-16 15:08 Stefan Theil
0 siblings, 0 replies; only message in thread
From: Stefan Theil @ 2018-10-16 15:08 UTC (permalink / raw)
To: u-boot
Hello,
I am currently trying to build and run a current U-Boot on my Zybo Z7 board. From the existence of a defconfig for it and going through the changelog it is seems to be supported. However, if I put the generated boot.bin and u-boot.img on an SD card and turn the board on all I see on the serial port is several garbled characters and then nothing happens.
I have not changed any configuration settings so I expected to get a bootable image. Have I missed something or is the Zybo Z7 not supported after all?
Regards,
Stefan Theil
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-10-16 15:08 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-10-16 15:08 [U-Boot] Building U-Boot for Digilent Zybo Z7 Stefan Theil
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox