From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eugen.Hristev at microchip.com Date: Mon, 19 Nov 2018 08:22:55 +0000 Subject: [U-Boot] [PATCH 0/4] at91: SPL size check for at91 boards Message-ID: <1542615470-17992-1-git-send-email-eugen.hristev@microchip.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This is a review of the patch [U-Boot,RFC] ARM: at91: lds: add test SPL binary size and bbs size Commit: ARM: at91: lds: add test SPL binary size and bbs size will check for the SPL size and bss to see if it can fit the known RAM area where it's supposed to be loaded. If the size exceeds, it will print an error in build. However, some platforms already have the SPL broken: it is too big for the RAM area. These platforms would fail to build if we enable this SPL size check. So, I made the commits for these defconfigs to disable SPL before adding the actual check (for bisectability, do not break any builds in between the series commits). In short, first three commits will prepare defconfigs for the SPL check and the last commit will implement the actual size checks. Eugen Hristev (2): configs: corvus_defconfig: Remove SPL configs: wb45n_defconfig: Remove SPL Wenyou Yang (2): configs: picosam9g45_defconfig: Remove SPL ARM: at91: lds: add test SPL binary size and bbs size arch/arm/mach-at91/arm926ejs/u-boot-spl.lds | 10 ++++++++++ configs/corvus_defconfig | 8 -------- configs/picosam9g45_defconfig | 10 ---------- configs/wb45n_defconfig | 6 ------ 4 files changed, 10 insertions(+), 24 deletions(-) -- 2.7.4