[U-Boot] [PATCH 2/4] configs: corvus_defconfig: Remove SPL

[Eugen.Hristev at microchip.com <Eugen.Hristev@microchip.com>]

Due the size of SPL being too big, remove the SPL support.
---8<---
arm-linux-gnueabi-ld: SPL image too big
--->8---

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
 configs/corvus_defconfig | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index a1af2f1..f3d68a2 100644
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -1,16 +1,9 @@
 CONFIG_ARM=y
 CONFIG_SYS_THUMB_BUILD=y
-# CONFIG_SPL_USE_ARCH_MEMCPY is not set
-# CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x72000000
 CONFIG_TARGET_CORVUS=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x800
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
@@ -18,7 +11,6 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
-- 
2.7.4