From mboxrd@z Thu Jan  1 00:00:00 1970
From: Chee, Tien Fong <tien.fong.chee@intel.com>
Date: Fri, 1 Feb 2019 03:48:18 +0000
Subject: [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA
 bitstream type and file name for Arria 10
In-Reply-To: <acbfe6b1-413a-9fb1-7e23-dc06613bf48a@denx.de>
References: <1548946304-17460-1-git-send-email-tien.fong.chee@intel.com>
 <1548946304-17460-2-git-send-email-tien.fong.chee@intel.com>
 <acbfe6b1-413a-9fb1-7e23-dc06613bf48a@denx.de>
Message-ID: <1548992898.11133.13.camel@intel.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
To: u-boot@lists.denx.de

On Thu, 2019-01-31 at 15:54 +0100, Marek Vasut wrote:
> On 1/31/19 3:51 PM, tien.fong.chee at intel.com wrote:
> > 
> > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > 
> > This patch adds description on properties about file name used for
> > both
> > peripheral bitstream and core bitstream.
> > 
> > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> > 
> > ---
> > 
> > changes for v7
> > - Provided example of setting FPGA FIT image for both early IO
> > release
> >   and full release FPGA configuration.
> > ---
> >  .../fpga/altera-socfpga-a10-fpga-mgr.txt           | 34
> > +++++++++++++++++++++-
> >  1 file changed, 33 insertions(+), 1 deletion(-)
> > 
> > diff --git a/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-
> > mgr.txt b/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-
> > mgr.txt
> > index 2fd8e7a..5f81a32 100644
> > --- a/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
> > +++ b/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
> > @@ -7,8 +7,39 @@ Required properties:
> >                 - The second index is for writing FPGA
> > configuration data.
> >  - resets     : Phandle and reset specifier for the device's reset.
> >  - clocks     : Clocks used by the device.
> > +- altr,bitstream : File name for FPGA peripheral bitstream which
> > is used
> > +		   to initialize FPGA IOs, PLL, IO48 and DDR. This
> > bitstream is
> > +		   required to get DDR up running.
> > +		   or
> > +		   File name for full bitstream, consist of
> > peripheral bitstream
> > +		   and core bitstream.
> > +- altr,bitstream-core(optional) : File name for core bitstream
> > which contains
> Is the name of the property 'altr,bitstream-core(optional)' ? I think
> the "optional" part should be in the description.
Yes, you are right.
> 
> > 
> > +				  FPGA design which is used to
> > program FPGA CRAM
> > +				  and ERAM.
> >  
> > -Example:
> > +Example: Bundles both peripheral bitstream and core bitstream into
> > FIT image
> > +	 called fit_spl_fpga.itb. This FIT image can be created
> > through running
> > +	 this command: tools/mkimage
> > +		       -E -p 400
> > +		       -f board/altera/arria10-
> > socdk/fit_spl_fpga.its
> > +		       fit_spl_fpga.itb
> > +
> > +	 For details of describing structure and contents of the
> > FIT image,
> > +	 please refer board/altera/arria10-socdk/fit_spl_fpga.its
> > +
> > +- Examples for booting with early IO release, and enter early user
> > mode:
> > +
> > +	fpga_mgr: fpga-mgr at ffd03000 {
> > +		compatible = "altr,socfpga-a10-fpga-mgr";
> > +		reg = <0xffd03000 0x100
> > +		       0xffcfe400 0x20>;
> > +		clocks = <&l4_mp_clk>;
> > +		resets = <&rst FPGAMGR_RESET>;
> > +		altr,bitstream = "fit_spl_fpga.itb";
> > +		altr,bitstream-core = "fit_spl_fpga.itb";
> It's the same file, why does it use two properties ? 
1. Allows user to run optional for program core. When "" is set to 
altr,bitstream-core, then SPL would skip programming FPGA with core, so
user can program it later on U-Boot or Linux.
2. Allows core in different FIT file.

> And where is this
> file loaded from ?
You need to set the default source in DTS, for example "firmware-loader 
= &fs_loader0", that's for power boot up purpose. After that, generic
firmware loader would go to the dsignated storage as described below to
find the FPGA FIT image according description from above.

	fs_loader0: fs-loader at 0 {
		u-boot,dm-pre-reloc;
		compatible = "u-boot,fs-loader";
		phandlepart = <&mmc 1>;
	};
> 
> > 
> > +	};
> > +
> > +- Examples for booting with full release, enter user mode with
> > full bitstream:
> >  
> >  	fpga_mgr: fpga-mgr at ffd03000 {
> >  		compatible = "altr,socfpga-a10-fpga-mgr";
> > @@ -16,4 +47,5 @@ Example:
> >  		       0xffcfe400 0x20>;
> >  		clocks = <&l4_mp_clk>;
> >  		resets = <&rst FPGAMGR_RESET>;
> > +		altr,bitstream = "fit_spl_fpga.itb";
> >  	};
> > 
>