From mboxrd@z Thu Jan  1 00:00:00 1970
From: techie_vasu <deepavas@gmail.com>
Date: Fri, 15 Feb 2008 08:33:12 -0800 (PST)
Subject: [U-Boot-Users] problems with CRC in fw_printenv and fw_setenv
 utility and use
In-Reply-To: <14767876.post@talk.nabble.com>
References: <14767876.post@talk.nabble.com>
Message-ID: <15502930.post@talk.nabble.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


Hello,

  Can you please tell me how to build the fw_setenv and fw_printenv using
the mtd-user.h file? I am new to Linux. Please help. I don't see mtd/ in
proc/ directory.

Thanks


u-boot user wrote:
> 
> Hello all,
> 
> I have built the binary fw_printenv by using mtd-user.h from mtd-utils on
> the internet as it fw_printenv won't compile it without using that file.
> So I have used mtd-user.h and mtd-abi.h. The contents of my configuration
> file are 
> # MTD device name       Device offset   Env. size       Flash sector size
> /dev/mtd1               0x0000          0x4000          0x4000 
> 
> When I run fw_printenv  it complained with error Warning : Bad CRC using
> default environment in env_init function in fw_env.c source code. To gain
> a better understanding I print the value crc1 calculated using
> crc32(0,environment.data,ENV_SIZE).  The value it prints is CRC
> computed:FE641197
> If I print the environment.crc value it is D0CA8A0E. As the checksum
> values are different crc1_ok is not set and I get the error. Any clue as
> to why these values would be different? 
> 
> When I use the fw_setenv utility to set an environment variable it gives
> the following errors 
> Writing CRC value to flash: D0C78567
> Unlocking flash...
> Other dev values are: 0
> Current dev value: 0
> Done
> Erasing old environment...
> MTD erase error on /dev/mtd1: Invalid argument
> Error: can't write fw_env to flash
> 
> I want to be able to set bootvars and print bootvars from user space Linux
> code. Linux has support for mtd-utils we tested the mtd-utils interface.
> 
> I look forward to your replies. I appreciate your help.
> 
> Thanks and Regards
> 

-- 
View this message in context: http://www.nabble.com/problems-with-CRC-in-fw_printenv-and-fw_setenv-utility-and-use-tp14767876p15502930.html
Sent from the Uboot - Users mailing list archive at Nabble.com.