From mboxrd@z Thu Jan  1 00:00:00 1970
From: Chee, Tien Fong <tien.fong.chee@intel.com>
Date: Tue, 26 Feb 2019 14:30:39 +0000
Subject: [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA
 bitstream fitImage for Arria10 SoCDK
In-Reply-To: <3be7cc5e-cfa2-81ad-8b76-0cbbabd1bf55@monstr.eu>
References: <1550548041-32682-1-git-send-email-tien.fong.chee@intel.com>
 <1550548041-32682-3-git-send-email-tien.fong.chee@intel.com>
 <3be7cc5e-cfa2-81ad-8b76-0cbbabd1bf55@monstr.eu>
Message-ID: <1551191438.9804.2.camel@intel.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
To: u-boot@lists.denx.de

On Tue, 2019-02-26 at 15:07 +0100, Michal Simek wrote:
> On 19. 02. 19 4:47, tien.fong.chee at intel.com wrote:
> > 
> > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > 
> > Add default fitImage file bundling FPGA bitstreams for Arria10.
> > 
> > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> > 
> > ---
> > 
> > changes for v8
> > - Reordered the images and fpga configurations.
> > - Removed the load property at core image.
> > 
> > changes for v8
> > - Changed the FPGA node name to fpga-core and fpga-periph for both
> > core and
> >   periph bitstreams respectively.
> > ---
> >  board/altera/arria10-socdk/fit_spl_fpga.its | 38
> > +++++++++++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >  create mode 100644 board/altera/arria10-socdk/fit_spl_fpga.its
> > 
> > diff --git a/board/altera/arria10-socdk/fit_spl_fpga.its
> > b/board/altera/arria10-socdk/fit_spl_fpga.its
> > new file mode 100644
> > index 0000000..df84562
> > --- /dev/null
> > +++ b/board/altera/arria10-socdk/fit_spl_fpga.its
> > @@ -0,0 +1,38 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > + /*
> > + * Copyright (C) 2019 Intel Corporation <www.intel.com>
> > + *
> > + */
> > +
> > +/dts-v1/;
> > +
> > +/ {
> > +	description = "FIT image with FPGA bistream";
> > +	#address-cells = <1>;
> > +
> > +	images {
> > +		fpga-periph at 1 {
> Still this is DT and using @1 without reg property below is wrong.
Sorry, i'm not getting you.
Mind to explain more?
> 
> > 
> > +			description = "FPGA peripheral bitstream";
> > +			data =
> > /incbin/("../../../ghrd_10as066n2.periph.rbf");
> > +			type = "fpga";
> > +			arch = "arm";
> > +			compression = "none";
> > +		};
> > +
> > +		fpga-core at 2 {
> ditto.
> 
> > 
> > +			description = "FPGA core bitstream";
> > +			data =
> > /incbin/("../../../ghrd_10as066n2.core.rbf");
> > +			type = "fpga";
> > +			arch = "arm";
> > +			compression = "none";
> > +		};
> > +	};
> > +
> > +	configurations {
> > +		default = "config-1";
> > +		config-1 {
> > +			description = "Boot with FPGA early IO
> > release config";
> > +			fpga = "fpga-periph at 1", "fpga-core at 2";
> > +		};
> > +	};
> > +};
> > 
> M
>