[U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK

[Chee, Tien Fong <tien.fong.chee@intel.com>]

On Tue, 2019-02-26 at 16:43 +0100, Michal Simek wrote:
> On 26. 02. 19 15:30, Chee, Tien Fong wrote:
> > 
> > On Tue, 2019-02-26 at 15:07 +0100, Michal Simek wrote:
> > > 
> > > On 19. 02. 19 4:47, tien.fong.chee at intel.com wrote:
> > > > 
> > > > 
> > > > From: Tien Fong Chee <tien.fong.chee@intel.com>
> > > > 
> > > > Add default fitImage file bundling FPGA bitstreams for Arria10.
> > > > 
> > > > Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> > > > 
> > > > ---
> > > > 
> > > > changes for v8
> > > > - Reordered the images and fpga configurations.
> > > > - Removed the load property at core image.
> > > > 
> > > > changes for v8
> > > > - Changed the FPGA node name to fpga-core and fpga-periph for
> > > > both
> > > > core and
> > > >   periph bitstreams respectively.
> > > > ---
> > > >  board/altera/arria10-socdk/fit_spl_fpga.its | 38
> > > > +++++++++++++++++++++++++++++
> > > >  1 file changed, 38 insertions(+)
> > > >  create mode 100644 board/altera/arria10-socdk/fit_spl_fpga.its
> > > > 
> > > > diff --git a/board/altera/arria10-socdk/fit_spl_fpga.its
> > > > b/board/altera/arria10-socdk/fit_spl_fpga.its
> > > > new file mode 100644
> > > > index 0000000..df84562
> > > > --- /dev/null
> > > > +++ b/board/altera/arria10-socdk/fit_spl_fpga.its
> > > > @@ -0,0 +1,38 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > + /*
> > > > + * Copyright (C) 2019 Intel Corporation <www.intel.com>
> > > > + *
> > > > + */
> > > > +
> > > > +/dts-v1/;
> > > > +
> > > > +/ {
> > > > +	description = "FIT image with FPGA bistream";
> > > > +	#address-cells = <1>;
> > > > +
> > > > +	images {
> > > > +		fpga-periph at 1 {
> > > Still this is DT and using @1 without reg property below is
> > > wrong.
> > Sorry, i'm not getting you.
> > Mind to explain more?
> it should be just fpga-periph {
> because you don't have reg properly below.
So this rule also apply for ITS image node name?
How about fpga-periph-1?
> 
> M
> 
> 
> 
>