public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Ley Foon Tan <ley.foon.tan@intel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3] arm: dts: Stratix10: Add QSPI node
Date: Mon, 25 Mar 2019 10:53:12 +0800	[thread overview]
Message-ID: <1553482392-9934-1-git-send-email-ley.foon.tan@intel.com> (raw)

Add QSPI device tree to Stratix 10.
Sync from Linux Stratix 10 dts.

Tested on Stratix 10 SoC devkit.
SOCFPGA_STRATIX10 # sf probe 0:0
SF: Detected mt25qu02g with page size 256 Bytes, erase size 64 KiB, total 256 MiB

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

---
v2->v3:
- Change flash compatible to "jedec,spi-nor"
- Change spi-max-frequency to 100MHz
---
 arch/arm/dts/socfpga_stratix10.dtsi      | 15 +++++++++++++++
 arch/arm/dts/socfpga_stratix10_socdk.dts | 21 +++++++++++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/arch/arm/dts/socfpga_stratix10.dtsi b/arch/arm/dts/socfpga_stratix10.dtsi
index ee93725d64..9998bb1ba3 100644
--- a/arch/arm/dts/socfpga_stratix10.dtsi
+++ b/arch/arm/dts/socfpga_stratix10.dtsi
@@ -391,5 +391,20 @@
 			resets = <&rst WATCHDOG3_RESET>;
 			status = "disabled";
 		};
+
+		qspi: spi at ff8d2000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff8d2000 0x100>,
+			      <0xff900000 0x100000>;
+			interrupts = <0 3 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			bus-num = <0>;
+			status = "disabled";
+			u-boot,dm-pre-reloc;
+		};
 	};
 };
diff --git a/arch/arm/dts/socfpga_stratix10_socdk.dts b/arch/arm/dts/socfpga_stratix10_socdk.dts
index c59b77d829..9d7d11ee13 100644
--- a/arch/arm/dts/socfpga_stratix10_socdk.dts
+++ b/arch/arm/dts/socfpga_stratix10_socdk.dts
@@ -10,6 +10,7 @@
 
 	aliases {
 		serial0 = &uart0;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -87,6 +88,26 @@
 	smplsel = <0>;
 };
 
+&qspi {
+	status = "okay";
+
+	flash at 0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;      /* chip select */
+		spi-max-frequency = <100000000>;
+
+		page-size = <256>;
+		block-size = <16>; /* 2^16, 64KB */
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
-- 
2.19.0

                 reply	other threads:[~2019-03-25  2:53 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1553482392-9934-1-git-send-email-ley.foon.tan@intel.com \
    --to=ley.foon.tan@intel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox