From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv3 10/10] configs: Disable now unbuildable SPI options for boards
Date: Wed, 29 May 2019 17:01:36 -0400 [thread overview]
Message-ID: <1559163696-8722-10-git-send-email-trini@konsulko.com> (raw)
In-Reply-To: <1559163696-8722-1-git-send-email-trini@konsulko.com>
Now that various SPI related options depend on CONFIG_DEPRECATED, in
order for platforms to build out of the box they need to disable various
other options.
Cc: Albert ARIBAUD <albert.aribaud@3adev.fr>
Cc: Marek Vasut <marex@denx.de>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
board/renesas/sh7752evb/sh7752evb.c | 4 ++++
board/renesas/sh7753evb/sh7753evb.c | 4 ++++
board/renesas/sh7757lcr/sh7757lcr.c | 9 +++++++++
board/work-microwave/work_92105/Makefile | 3 ++-
board/work-microwave/work_92105/work_92105.c | 2 ++
configs/bg0900_defconfig | 9 ---------
configs/devkit3250_defconfig | 2 --
configs/mx28evk_auart_console_defconfig | 9 ---------
configs/mx28evk_defconfig | 9 ---------
configs/mx28evk_nand_defconfig | 9 ---------
configs/mx28evk_spi_defconfig | 10 ----------
configs/sh7752evb_defconfig | 6 ------
configs/sh7753evb_defconfig | 6 ------
configs/sh7757lcr_defconfig | 5 -----
configs/work_92105_defconfig | 2 --
include/configs/sh7752evb.h | 1 -
include/configs/sh7753evb.h | 1 -
include/configs/sh7757lcr.h | 1 -
18 files changed, 21 insertions(+), 71 deletions(-)
diff --git a/board/renesas/sh7752evb/sh7752evb.c b/board/renesas/sh7752evb/sh7752evb.c
index 480933b3cc96..da33a0bd8a2f 100644
--- a/board/renesas/sh7752evb/sh7752evb.c
+++ b/board/renesas/sh7752evb/sh7752evb.c
@@ -174,6 +174,7 @@ int board_mmc_init(bd_t *bis)
static int get_sh_eth_mac_raw(unsigned char *buf, int size)
{
+#ifdef CONFIG_DEPRECATED
struct spi_flash *spi;
int ret;
@@ -190,6 +191,7 @@ static int get_sh_eth_mac_raw(unsigned char *buf, int size)
return 1;
}
spi_flash_free(spi);
+#endif
return 0;
}
@@ -239,6 +241,7 @@ int board_late_init(void)
return 0;
}
+#ifdef CONFIG_DEPRECATED
int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i, ret;
@@ -302,3 +305,4 @@ U_BOOT_CMD(
"write MAC address for GETHERC",
"[GETHERC ch0] [GETHERC ch1]\n"
);
+#endif
diff --git a/board/renesas/sh7753evb/sh7753evb.c b/board/renesas/sh7753evb/sh7753evb.c
index dfdc6b79b7ae..5ddddb65711d 100644
--- a/board/renesas/sh7753evb/sh7753evb.c
+++ b/board/renesas/sh7753evb/sh7753evb.c
@@ -190,6 +190,7 @@ int board_mmc_init(bd_t *bis)
static int get_sh_eth_mac_raw(unsigned char *buf, int size)
{
+#ifdef CONFIG_DEPRECATED
struct spi_flash *spi;
int ret;
@@ -206,6 +207,7 @@ static int get_sh_eth_mac_raw(unsigned char *buf, int size)
return 1;
}
spi_flash_free(spi);
+#endif
return 0;
}
@@ -255,6 +257,7 @@ int board_late_init(void)
return 0;
}
+#ifdef CONFIG_DEPRECATED
int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i, ret;
@@ -318,3 +321,4 @@ U_BOOT_CMD(
"write MAC address for GETHERC",
"[GETHERC ch0] [GETHERC ch1]\n"
);
+#endif
diff --git a/board/renesas/sh7757lcr/sh7757lcr.c b/board/renesas/sh7757lcr/sh7757lcr.c
index 90c5508e439c..3222701ad2db 100644
--- a/board/renesas/sh7757lcr/sh7757lcr.c
+++ b/board/renesas/sh7757lcr/sh7757lcr.c
@@ -30,6 +30,7 @@ static void init_gctrl(void)
static int init_pcie_bridge_from_spi(void *buf, size_t size)
{
+#ifdef CONFIG_DEPRECATED
struct spi_flash *spi;
int ret;
unsigned long pcie_addr;
@@ -54,6 +55,10 @@ static int init_pcie_bridge_from_spi(void *buf, size_t size)
spi_flash_free(spi);
return 0;
+#else
+ printf("No SPI support so no PCIe support\n");
+ return 1;
+#endif
}
static void init_pcie_bridge(void)
@@ -231,6 +236,7 @@ int board_mmc_init(bd_t *bis)
static int get_sh_eth_mac_raw(unsigned char *buf, int size)
{
+#ifdef CONFIG_DEPRECATED
struct spi_flash *spi;
int ret;
@@ -247,6 +253,7 @@ static int get_sh_eth_mac_raw(unsigned char *buf, int size)
return 1;
}
spi_flash_free(spi);
+#endif
return 0;
}
@@ -352,6 +359,7 @@ U_BOOT_CMD(
"enable SH-G200 bus (disable PCIe-G200)"
);
+#ifdef CONFIG_DEPRECATED
int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i, ret;
@@ -418,3 +426,4 @@ U_BOOT_CMD(
"write MAC address for ETHERC/GETHERC",
"[ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1]\n"
);
+#endif
diff --git a/board/work-microwave/work_92105/Makefile b/board/work-microwave/work_92105/Makefile
index e3803bb04315..b837e7b0dd8f 100644
--- a/board/work-microwave/work_92105/Makefile
+++ b/board/work-microwave/work_92105/Makefile
@@ -6,5 +6,6 @@
ifdef CONFIG_SPL_BUILD
obj-y += work_92105_spl.o
else
-obj-y += work_92105.o work_92105_display.o
+obj-y += work_92105.o
+obj-$(CONFIG_DEPRECATED) += work_92105_display.o
endif
diff --git a/board/work-microwave/work_92105/work_92105.c b/board/work-microwave/work_92105/work_92105.c
index eb2e7d7eb88a..3f23af9ed40c 100644
--- a/board/work-microwave/work_92105/work_92105.c
+++ b/board/work-microwave/work_92105/work_92105.c
@@ -52,8 +52,10 @@ int board_early_init_r(void)
gpio_request(GPO_19, "NAND_nWP");
gpio_direction_output(GPO_19, 1);
+#ifdef CONFIG_DEPRECATED
/* initialize display */
work_92105_display_init();
+#endif
return 0;
}
diff --git a/configs/bg0900_defconfig b/configs/bg0900_defconfig
index a71ec2b03e32..353790f44640 100644
--- a/configs/bg0900_defconfig
+++ b/configs/bg0900_defconfig
@@ -22,9 +22,6 @@ CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_DEFAULT_SPI_BUS=2
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
@@ -33,13 +30,7 @@ CONFIG_DOS_PARTITION=y
# CONFIG_MMC is not set
CONFIG_NAND=y
CONFIG_NAND_MXS=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=40000000
-CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_OF_LIBFDT=y
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index c7a7983976ba..a47cf02b8fbd 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -22,7 +22,6 @@ CONFIG_CMD_IMLS=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
-CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
@@ -45,7 +44,6 @@ CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ADDR=31
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
-CONFIG_LPC32XX_SSP=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig
index 9fbe9ea510ac..27c152571a2f 100644
--- a/configs/mx28evk_auart_console_defconfig
+++ b/configs/mx28evk_auart_console_defconfig
@@ -22,9 +22,6 @@ CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_DEFAULT_SPI_BUS=2
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
@@ -44,15 +41,9 @@ CONFIG_ENV_IS_IN_MMC=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=24000000
-CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig
index 62661eac3131..4cee901d8321 100644
--- a/configs/mx28evk_defconfig
+++ b/configs/mx28evk_defconfig
@@ -22,9 +22,6 @@ CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_DEFAULT_SPI_BUS=2
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
@@ -44,15 +41,9 @@ CONFIG_ENV_IS_IN_MMC=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=24000000
-CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig
index f18dbd374984..3875da733adb 100644
--- a/configs/mx28evk_nand_defconfig
+++ b/configs/mx28evk_nand_defconfig
@@ -21,9 +21,6 @@ CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_DEFAULT_SPI_BUS=2
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
@@ -43,15 +40,9 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=24000000
-CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig
index db3ac7d7a207..37477b35f1cb 100644
--- a/configs/mx28evk_spi_defconfig
+++ b/configs/mx28evk_spi_defconfig
@@ -21,9 +21,6 @@ CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_DEFAULT_SPI_BUS=2
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
@@ -39,19 +36,12 @@ CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=24000000
-CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/sh7752evb_defconfig b/configs/sh7752evb_defconfig
index b34709d1ea73..d9fa1ca57fc9 100644
--- a/configs/sh7752evb_defconfig
+++ b/configs/sh7752evb_defconfig
@@ -18,7 +18,6 @@ CONFIG_CMD_MD5SUM=y
# CONFIG_CMD_LOADB is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SDRAM=y
-CONFIG_CMD_SF=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
@@ -29,14 +28,9 @@ CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_MMC=y
CONFIG_SH_MMCIF=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SH_ETHER=y
CONFIG_SCIF_CONSOLE=y
CONFIG_SPI=y
-CONFIG_SH_SPI=y
CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/configs/sh7753evb_defconfig b/configs/sh7753evb_defconfig
index 857e90b86ab2..e5698d802f78 100644
--- a/configs/sh7753evb_defconfig
+++ b/configs/sh7753evb_defconfig
@@ -17,7 +17,6 @@ CONFIG_CMD_MD5SUM=y
# CONFIG_CMD_LOADB is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SDRAM=y
-CONFIG_CMD_SF=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
@@ -28,14 +27,9 @@ CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_MMC=y
CONFIG_SH_MMCIF=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SH_ETHER=y
CONFIG_SCIF_CONSOLE=y
CONFIG_SPI=y
-CONFIG_SH_SPI=y
CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/configs/sh7757lcr_defconfig b/configs/sh7757lcr_defconfig
index 8314435b9384..f9b7379cee75 100644
--- a/configs/sh7757lcr_defconfig
+++ b/configs/sh7757lcr_defconfig
@@ -20,7 +20,6 @@ CONFIG_CMD_MD5SUM=y
# CONFIG_CMD_LOADB is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SDRAM=y
-CONFIG_CMD_SF=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
@@ -31,13 +30,9 @@ CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_MMC=y
CONFIG_SH_MMCIF=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SH_ETHER=y
CONFIG_SCIF_CONSOLE=y
CONFIG_SPI=y
-CONFIG_SH_SPI=y
CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig
index bbd13e0cd9f3..01c8884f2b77 100644
--- a/configs/work_92105_defconfig
+++ b/configs/work_92105_defconfig
@@ -28,7 +28,6 @@ CONFIG_CMD_EEPROM=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
-CONFIG_CMD_SPI=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
@@ -41,4 +40,3 @@ CONFIG_PHYLIB=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
-CONFIG_LPC32XX_SSP=y
diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h
index 1f29e3d221e8..c90d8e0e9a52 100644
--- a/include/configs/sh7752evb.h
+++ b/include/configs/sh7752evb.h
@@ -63,7 +63,6 @@
#define CONFIG_SH_MMCIF_CLK 48000000
/* ENV setting */
-#define CONFIG_ENV_IS_EMBEDDED
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_ADDR (0x00080000)
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
diff --git a/include/configs/sh7753evb.h b/include/configs/sh7753evb.h
index 0693fb5a3c49..83d123f33a78 100644
--- a/include/configs/sh7753evb.h
+++ b/include/configs/sh7753evb.h
@@ -63,7 +63,6 @@
#define CONFIG_SH_MMCIF_CLK 48000000
/* ENV setting */
-#define CONFIG_ENV_IS_EMBEDDED
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_ADDR (0x00080000)
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h
index 05b2f01c15ac..f92f06649496 100644
--- a/include/configs/sh7757lcr.h
+++ b/include/configs/sh7757lcr.h
@@ -75,7 +75,6 @@
#define SH7757LCR_PCIEBRG_SIZE (96 * 1024)
/* ENV setting */
-#define CONFIG_ENV_IS_EMBEDDED
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_ADDR (0x00080000)
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
--
2.7.4
next prev parent reply other threads:[~2019-05-29 21:01 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-29 21:01 [U-Boot] [PATCHv3 01/10] arm: Remove zipitz2 board Tom Rini
2019-05-29 21:01 ` [U-Boot] [PATCHv3 02/10] Kconfig: Add SPI / SPI_FLASH as dependencies Tom Rini
2019-06-12 7:29 ` Jagan Teki
2019-05-29 21:01 ` [U-Boot] [PATCHv3 03/10] Kconfig: Add DEPRECATED option Tom Rini
2019-06-12 7:33 ` Jagan Teki
2019-06-12 13:38 ` Tom Rini
2019-06-12 15:45 ` Jagan Teki
2019-06-12 15:54 ` Tom Rini
2019-06-12 17:12 ` Jagan Teki
2019-05-29 21:01 ` [U-Boot] [PATCHv3 04/10] Makefile: Trigger a Warning if DEPRECATED is defined Tom Rini
2019-05-29 21:01 ` [U-Boot] [PATCHv3 05/10] Makefile: Trigger a warning for legcay spi drivers Tom Rini
2019-05-29 21:01 ` [U-Boot] [PATCHv3 06/10] spi: Kconfig: Mark MXS_SPI has DEPRECATED Tom Rini
2019-05-29 21:01 ` [U-Boot] [PATCHv3 07/10] spi: Kconfig: Mark SH_SPI as DEPRECATED Tom Rini
2019-05-29 21:01 ` [U-Boot] [PATCHv3 08/10] spi: Kconfig: Mark SOFT_SPI " Tom Rini
2019-05-29 21:01 ` [U-Boot] [PATCHv3 09/10] spi: Kconfig: Mark LPC32XX_SSP " Tom Rini
2019-05-29 21:01 ` Tom Rini [this message]
2019-05-29 21:33 ` [U-Boot] [PATCHv3 10/10] configs: Disable now unbuildable SPI options for boards Marek Vasut
2019-06-12 7:28 ` Jagan Teki
2019-05-29 22:27 ` [U-Boot] [PATCHv3 01/10] arm: Remove zipitz2 board Vasily Khoruzhick
2019-06-17 7:44 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1559163696-8722-10-git-send-email-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox