[U-Boot] [PATCH v2 2/2] ARM: socfpga: stratix10: Remove CONFIG_OF_EMBED

[See, Chin Liang <chin.liang.see@intel.com>]

On Tue, 2019-06-04 at 07:13 +0200, Simon Goldschmidt wrote:
> On Tue, Jun 4, 2019 at 1:57 AM Dalon Westergreen
> <dalon.westergreen@linux.intel.com> wrote:
> > 
> > 
> > From: Dalon Westergreen <dalon.westergreen@intel.com>
> > 
> > CONFIG_OF_EMBED was primarily enabled to support the stratix10
> > spl hex file requirements.  Since this option now produces a
> > warning during build, and the spl hex can be created using
> > alternate methods, CONFIG_OF_EMBED is no longer needed.
> > 
> > Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
> > 
> > ---
> > Changes in v2:
> >  -> Change CONFIG_SPL_TARGET back to u-boot-spl.hex
> > ---
> >  configs/socfpga_stratix10_defconfig       | 1 -
> >  include/configs/socfpga_stratix10_socdk.h | 2 +-
> >  2 files changed, 1 insertion(+), 2 deletions(-)
> > 
> > diff --git a/configs/socfpga_stratix10_defconfig
> > b/configs/socfpga_stratix10_defconfig
> > index fbab388b43..f27180385d 100644
> > --- a/configs/socfpga_stratix10_defconfig
> > +++ b/configs/socfpga_stratix10_defconfig
> > @@ -26,7 +26,6 @@ CONFIG_CMD_CACHE=y
> >  CONFIG_CMD_EXT4=y
> >  CONFIG_CMD_FAT=y
> >  CONFIG_CMD_FS_GENERIC=y
> > -CONFIG_OF_EMBED=y
> >  CONFIG_DEFAULT_DEVICE_TREE="socfpga_stratix10_socdk"
> >  CONFIG_ENV_IS_IN_MMC=y
> >  CONFIG_NET_RANDOM_ETHADDR=y
> > diff --git a/include/configs/socfpga_stratix10_socdk.h
> > b/include/configs/socfpga_stratix10_socdk.h
> > index 39d757d737..66855ff0d8 100644
> > --- a/include/configs/socfpga_stratix10_socdk.h
> > +++ b/include/configs/socfpga_stratix10_socdk.h
> > @@ -210,6 +210,6 @@ unsigned int cm_get_l4_sys_free_clk_hz(void);
> > 
> >  /* SPL SDMMC boot support */
> >  #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
> > -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-
> > boot.img"
> > +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot-
> > dtb.img"
> Is that really necessary? I don't have the aarch64 compiler at hand,
> but when compiling a gen5 board, "u-boot.img" and "u-boot-dtb.img"
> are the same. Changing to "u-boot-dtb.img" here only complicates
> things for the user, I think.

I would agree with Dalon since we want to make sure we use same name as
socfpga_common.h, which is for CV, A10 SoCs. This would help to
standardize our internal test infra.

Thanks
Chin Liang

> 
> Regards,
> Simon
> 
> > 
> > 
> >  #endif /* __CONFIG_H */
> > --
> > 2.21.0
> >