From: Bin Meng <bmeng.cn@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 21/50] doc: board: Add Intel Bay Trail based board docs
Date: Thu, 18 Jul 2019 00:34:06 -0700 [thread overview]
Message-ID: <1563435275-22326-22-git-send-email-bmeng.cn@gmail.com> (raw)
In-Reply-To: <1563435275-22326-1-git-send-email-bmeng.cn@gmail.com>
This extracts Intel Bay Trail based board specific information from
README.x86, converts plain text documentation to reST format and
adds them to Sphinx TOC tree. No essential content change.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---
doc/README.x86 | 75 -------------------------------------------
doc/board/intel/bayleybay.rst | 29 +++++++++++++++++
doc/board/intel/index.rst | 2 ++
doc/board/intel/minnowmax.rst | 70 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 101 insertions(+), 75 deletions(-)
create mode 100644 doc/board/intel/bayleybay.rst
create mode 100644 doc/board/intel/minnowmax.rst
diff --git a/doc/README.x86 b/doc/README.x86
index 8077ff3..b4f0f7c 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -226,81 +226,6 @@ to the last 2MB of the 8MB chip, address range [600000, 7FFFFF].
---
-Intel Bay Trail based board instructions for bare mode:
-
-This uses as FSP as with Crown Bay, except it is for the Atom E3800 series.
-Two boards that use this configuration are Bayley Bay and Minnowboard MAX.
-Download this and get the .fd file (BAYTRAIL_FSP_GOLD_003_16-SEP-2014.fd at
-the time of writing). Put it in the corresponding board directory and rename
-it to fsp.bin.
-
-Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same
-board directory as vga.bin.
-
-You still need two more binary blobs. For Bayley Bay, they can be extracted
-from the sample SPI image provided in the FSP (SPI.bin at the time of writing).
-
- $ ./tools/ifdtool -x BayleyBay/SPI.bin
- $ cp flashregion_0_flashdescriptor.bin board/intel/bayleybay/descriptor.bin
- $ cp flashregion_2_intel_me.bin board/intel/bayleybay/me.bin
-
-For Minnowboard MAX, we can reuse the same ME firmware above, but for flash
-descriptor, we need get that somewhere else, as the one above does not seem to
-work, probably because it is not designed for the Minnowboard MAX. Now download
-the original firmware image for this board from:
-
-http://firmware.intel.com/sites/default/files/2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
-
-Unzip it:
-
- $ unzip 2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
-
-Use ifdtool in the U-Boot tools directory to extract the images from that
-file, for example:
-
- $ ./tools/ifdtool -x MNW2MAX1.X64.0073.R02.1409160934.bin
-
-This will provide the descriptor file - copy this into the correct place:
-
- $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
-
-Now you can build U-Boot and obtain u-boot.rom
-Note: below are examples/information for Minnowboard MAX.
-
-$ make minnowmax_defconfig
-$ make all
-
-Checksums are as follows (but note that newer versions will invalidate this):
-
-$ md5sum -b board/intel/minnowmax/*.bin
-ffda9a3b94df5b74323afb328d51e6b4 board/intel/minnowmax/descriptor.bin
-69f65b9a580246291d20d08cbef9d7c5 board/intel/minnowmax/fsp.bin
-894a97d371544ec21de9c3e8e1716c4b board/intel/minnowmax/me.bin
-a2588537da387da592a27219d56e9962 board/intel/minnowmax/vga.bin
-
-The ROM image is broken up into these parts:
-
-Offset Description Controlling config
-------------------------------------------------------------
-000000 descriptor.bin Hard-coded to 0 in ifdtool
-001000 me.bin Set by the descriptor
-500000 <spare>
-6ef000 Environment CONFIG_ENV_OFFSET
-6f0000 MRC cache CONFIG_ENABLE_MRC_CACHE
-700000 u-boot-dtb.bin CONFIG_SYS_TEXT_BASE
-7b0000 vga.bin CONFIG_VGA_BIOS_ADDR
-7c0000 fsp.bin CONFIG_FSP_ADDR
-7f8000 <spare> (depends on size of fsp.bin)
-7ff800 U-Boot 16-bit boot CONFIG_SYS_X86_START16
-
-Overall ROM image size is controlled by CONFIG_ROM_SIZE.
-
-Note that the debug version of the FSP is bigger in size. If this version
-is used, CONFIG_FSP_ADDR needs to be configured to 0xfffb0000 instead of
-the default value 0xfffc0000.
-
----
-
Intel Cherry Hill specific instructions for bare mode:
This uses Intel FSP for Braswell platform. Download it from Intel FSP website,
diff --git a/doc/board/intel/bayleybay.rst b/doc/board/intel/bayleybay.rst
new file mode 100644
index 0000000..db97f64
--- /dev/null
+++ b/doc/board/intel/bayleybay.rst
@@ -0,0 +1,29 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. sectionauthor:: Bin Meng <bmeng.cn@gmail.com>
+
+Bayley Bay CRB
+==============
+
+This uses as FSP as with Crown Bay, except it is for the Atom E3800 series.
+Download this and get the .fd file (BAYTRAIL_FSP_GOLD_003_16-SEP-2014.fd at
+the time of writing). Put it in the corresponding board directory and rename
+it to fsp.bin.
+
+Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same
+board directory as vga.bin.
+
+You still need two more binary blobs. For Bayley Bay, they can be extracted
+from the sample SPI image provided in the FSP (SPI.bin at the time of writing)::
+
+ $ ./tools/ifdtool -x BayleyBay/SPI.bin
+ $ cp flashregion_0_flashdescriptor.bin board/intel/bayleybay/descriptor.bin
+ $ cp flashregion_2_intel_me.bin board/intel/bayleybay/me.bin
+
+Now you can build U-Boot and obtain u-boot.rom::
+
+ $ make bayleybay_defconfig
+ $ make all
+
+Note that the debug version of the FSP is bigger in size. If this version
+is used, CONFIG_FSP_ADDR needs to be configured to 0xfffb0000 instead of
+the default value 0xfffc0000.
diff --git a/doc/board/intel/index.rst b/doc/board/intel/index.rst
index 93b8ba2..af24760 100644
--- a/doc/board/intel/index.rst
+++ b/doc/board/intel/index.rst
@@ -6,4 +6,6 @@ Intel
.. toctree::
:maxdepth: 2
+ bayleybay
crownbay
+ minnowmax
diff --git a/doc/board/intel/minnowmax.rst b/doc/board/intel/minnowmax.rst
new file mode 100644
index 0000000..0281217
--- /dev/null
+++ b/doc/board/intel/minnowmax.rst
@@ -0,0 +1,70 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. sectionauthor:: Simon Glass <sjg@chromium.org>
+
+Minnowboard MAX
+===============
+
+This uses as FSP as with Crown Bay, except it is for the Atom E3800 series.
+Download this and get the .fd file (BAYTRAIL_FSP_GOLD_003_16-SEP-2014.fd at
+the time of writing). Put it in the corresponding board directory and rename
+it to fsp.bin.
+
+Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same
+board directory as vga.bin.
+
+You still need two more binary blobs. For Minnowboard MAX, we can reuse the
+same ME firmware above, but for flash descriptor, we need get that somewhere
+else, as the one above does not seem to work, probably because it is not
+designed for the Minnowboard MAX. Now download the original firmware image
+for this board from:
+
+ * http://firmware.intel.com/sites/default/files/2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
+
+Unzip it::
+
+ $ unzip 2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
+
+Use ifdtool in the U-Boot tools directory to extract the images from that
+file, for example::
+
+ $ ./tools/ifdtool -x MNW2MAX1.X64.0073.R02.1409160934.bin
+
+This will provide the descriptor file - copy this into the correct place::
+
+ $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
+
+Now you can build U-Boot and obtain u-boot.rom::
+
+ $ make minnowmax_defconfig
+ $ make all
+
+Checksums are as follows (but note that newer versions will invalidate this)::
+
+ $ md5sum -b board/intel/minnowmax/*.bin
+ ffda9a3b94df5b74323afb328d51e6b4 board/intel/minnowmax/descriptor.bin
+ 69f65b9a580246291d20d08cbef9d7c5 board/intel/minnowmax/fsp.bin
+ 894a97d371544ec21de9c3e8e1716c4b board/intel/minnowmax/me.bin
+ a2588537da387da592a27219d56e9962 board/intel/minnowmax/vga.bin
+
+The ROM image is broken up into these parts:
+
+====== ================== ============================
+Offset Description Controlling config
+====== ================== ============================
+000000 descriptor.bin Hard-coded to 0 in ifdtool
+001000 me.bin Set by the descriptor
+500000 <spare>
+6ef000 Environment CONFIG_ENV_OFFSET
+6f0000 MRC cache CONFIG_ENABLE_MRC_CACHE
+700000 u-boot-dtb.bin CONFIG_SYS_TEXT_BASE
+7b0000 vga.bin CONFIG_VGA_BIOS_ADDR
+7c0000 fsp.bin CONFIG_FSP_ADDR
+7f8000 <spare> (depends on size of fsp.bin)
+7ff800 U-Boot 16-bit boot CONFIG_SYS_X86_START16
+====== ================== ============================
+
+Overall ROM image size is controlled by CONFIG_ROM_SIZE.
+
+Note that the debug version of the FSP is bigger in size. If this version
+is used, CONFIG_FSP_ADDR needs to be configured to 0xfffb0000 instead of
+the default value 0xfffc0000.
--
2.7.4
next prev parent reply other threads:[~2019-07-18 7:34 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-18 7:33 [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 01/50] doc: Move existing rst files into api sub-directory Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 02/50] doc: Add top-level description about U-Boot documentation Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 03/50] doc: Add driver-model to Sphinx TOC tree Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 04/50] doc: driver-model: Convert README.txt to reST Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 05/50] doc: driver-model: Convert MIGRATION.txt " Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 06/50] doc: driver-model: Convert fdt-fixup.txt " Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 07/50] doc: driver-model: Convert fs_firmware_loader.txt " Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 08/50] doc: driver-model: Convert i2c-howto.txt " Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 09/50] doc: driver-model: Convert livetree.txt " Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 10/50] doc: driver-model: Convert of-plat.txt " Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 11/50] doc: driver-model: Convert pci-info.txt " Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 12/50] doc: driver-model: Convert pmic-framework.txt " Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 13/50] doc: driver-model: Convert remoteproc-framework.txt " Bin Meng
2019-07-18 7:33 ` [U-Boot] [PATCH 14/50] doc: driver-model: Convert serial-howto.txt " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 15/50] doc: driver-model: Convert spi-howto.txt " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 16/50] doc: driver-model: Convert usb-info.txt " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 17/50] doc: Add architecture specific info to Sphinx TOC tree Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 18/50] doc: arch: Convert README.mips to reST Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 19/50] doc: Add board specific info to Sphinx TOC tree Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 20/50] doc: board: Add Intel Crown Bay board doc Bin Meng
2019-07-18 7:34 ` Bin Meng [this message]
2019-07-18 7:34 ` [U-Boot] [PATCH 22/50] doc: board: Add Intel Cherry Hill " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 23/50] doc: board: Add Intel Cougar Canyon 2 " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 24/50] doc: board: Add Intel Edison " Bin Meng
2019-07-18 18:27 ` Andy Shevchenko
2019-07-18 7:34 ` [U-Boot] [PATCH 25/50] doc: board: Add Intel Galileo " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 26/50] doc: board: Add Google Chromebook Link " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 27/50] doc: board: Add Google Chromebook Samus " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 28/50] doc: board: Add coreboot " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 29/50] doc: board: Add QEMU x86 " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 30/50] doc: board: Convert README.qemu-arm to reST Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 31/50] doc: board: Convert README.qemu-riscv " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 32/50] doc: board: Convert README.qemu-mips " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 33/50] doc: board: Add AndesTech ax25-ae350 board doc Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 34/50] doc: board: Convert README.ag101p to reST Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 35/50] doc: board: Convert README.sifive-fu540 " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 36/50] doc: board: Convert README.sh7752evb " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 37/50] doc: board: Convert README.sh7753evb " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 38/50] doc: board: Convert README.at91 " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 39/50] doc: board: Convert README.b4860qds " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 40/50] doc: board: Convert README.zynq " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 41/50] doc: arch: Convert README.x86 " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 42/50] doc: arch: Convert README.arm64 " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 43/50] doc: arch: Convert README.NDS32 " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 44/50] doc: arch: Convert README.nios2 " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 45/50] doc: arch: Convert README.ARC " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 46/50] doc: arch: Convert README.m68k " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 47/50] doc: arch: Convert README.sh " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 48/50] doc: arch: Convert README.sandbox " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 49/50] doc: arch: Convert README.xtensa " Bin Meng
2019-07-18 7:34 ` [U-Boot] [PATCH 50/50] doc: Remove README.blackfin Bin Meng
2019-07-23 6:20 ` [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs Bin Meng
2019-07-23 15:00 ` Wolfgang Denk
2019-07-23 15:29 ` Tom Rini
2019-07-24 4:59 ` Bin Meng
2019-07-24 4:53 ` Bin Meng
2019-07-24 7:08 ` Wolfgang Denk
2019-07-24 7:13 ` Bin Meng
2019-07-24 14:14 ` Tom Rini
2019-07-24 14:16 ` Bin Meng
2019-07-24 14:18 ` Tom Rini
2019-07-24 19:30 ` Heinrich Schuchardt
2019-07-24 20:05 ` Tom Rini
2019-07-25 18:31 ` Heinrich Schuchardt
2019-07-26 1:54 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1563435275-22326-22-git-send-email-bmeng.cn@gmail.com \
--to=bmeng.cn@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox