[U-Boot] [PATCH 22/50] doc: board: Add Intel Cherry Hill board doc

[Bin Meng <bmeng.cn@gmail.com>]

This extracts Intel Cherry Hill board specific information from
README.x86, converts plain text documentation to reST format and
adds it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

 doc/README.x86                 | 29 -----------------------------
 doc/board/intel/cherryhill.rst | 30 ++++++++++++++++++++++++++++++
 doc/board/intel/index.rst      |  1 +
 3 files changed, 31 insertions(+), 29 deletions(-)
 create mode 100644 doc/board/intel/cherryhill.rst

diff --git a/doc/README.x86 b/doc/README.x86
index b4f0f7c..8e549c3 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -226,35 +226,6 @@ to the last 2MB of the 8MB chip, address range [600000, 7FFFFF].
 
 ---
 
-Intel Cherry Hill specific instructions for bare mode:
-
-This uses Intel FSP for Braswell platform. Download it from Intel FSP website,
-put the .fd file to the board directory and rename it to fsp.bin.
-
-Extract descriptor.bin and me.bin from the original BIOS on the board using
-ifdtool and put them to the board directory as well.
-
-Note the FSP package for Braswell does not ship a traditional legacy VGA BIOS
-image for the integrated graphics device. Instead a new binary called Video
-BIOS Table (VBT) is shipped. Put it to the board directory and rename it to
-vbt.bin if you want graphics support in U-Boot.
-
-Now you can build U-Boot and obtain u-boot.rom
-
-$ make cherryhill_defconfig
-$ make all
-
-An important note for programming u-boot.rom to the on-board SPI flash is that
-you need make sure the SPI flash's 'quad enable' bit in its status register
-matches the settings in the descriptor.bin, otherwise the board won't boot.
-
-For the on-board SPI flash MX25U6435F, this can be done by writing 0x40 to the
-status register by DediProg in: Config > Modify Status Register > Write Status
-Register(s) > Register1 Value(Hex). This is is a one-time change. Once set, it
-persists in SPI flash part regardless of the u-boot.rom image burned.
-
----
-
 Intel Galileo instructions for bare mode:
 
 Only one binary blob is needed for Remote Management Unit (RMU) within Intel
diff --git a/doc/board/intel/cherryhill.rst b/doc/board/intel/cherryhill.rst
new file mode 100644
index 0000000..151f061
--- /dev/null
+++ b/doc/board/intel/cherryhill.rst
@@ -0,0 +1,30 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. sectionauthor:: Bin Meng <bmeng.cn@gmail.com>
+
+Cherry Hill CRB
+===============
+
+This uses Intel FSP for Braswell platform. Download it from Intel FSP website,
+put the .fd file to the board directory and rename it to fsp.bin.
+
+Extract descriptor.bin and me.bin from the original BIOS on the board using
+ifdtool and put them to the board directory as well.
+
+Note the FSP package for Braswell does not ship a traditional legacy VGA BIOS
+image for the integrated graphics device. Instead a new binary called Video
+BIOS Table (VBT) is shipped. Put it to the board directory and rename it to
+vbt.bin if you want graphics support in U-Boot.
+
+Now you can build U-Boot and obtain u-boot.rom::
+
+   $ make cherryhill_defconfig
+   $ make all
+
+An important note for programming u-boot.rom to the on-board SPI flash is that
+you need make sure the SPI flash's 'quad enable' bit in its status register
+matches the settings in the descriptor.bin, otherwise the board won't boot.
+
+For the on-board SPI flash MX25U6435F, this can be done by writing 0x40 to the
+status register by DediProg in: Config > Modify Status Register > Write Status
+Register(s) > Register1 Value(Hex). This is is a one-time change. Once set, it
+persists in SPI flash part regardless of the u-boot.rom image burned.
diff --git a/doc/board/intel/index.rst b/doc/board/intel/index.rst
index af24760..d30debb 100644
--- a/doc/board/intel/index.rst
+++ b/doc/board/intel/index.rst
@@ -7,5 +7,6 @@ Intel
    :maxdepth: 2
 
    bayleybay
+   cherryhill
    crownbay
    minnowmax
-- 
2.7.4