[U-Boot] [PATCH v3 2/4] mmc: Add Aspeed SD controller driver

[Eddie James <eajames@linux.ibm.com>]

Add support for the Aspeed SD host controller engine.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 arch/arm/include/asm/gpio.h |  3 +-
 drivers/mmc/Kconfig         | 11 ++++++
 drivers/mmc/Makefile        |  1 +
 drivers/mmc/aspeed_sdhci.c  | 90 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 104 insertions(+), 1 deletion(-)
 create mode 100644 drivers/mmc/aspeed_sdhci.c

diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 370031f..38a5922 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -1,6 +1,7 @@
 #if !defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARCH_STI) && \
 	!defined(CONFIG_ARCH_K3) && !defined(CONFIG_ARCH_BCM6858) && \
-	!defined(CONFIG_ARCH_BCM63158) && !defined(CONFIG_ARCH_ROCKCHIP)
+	!defined(CONFIG_ARCH_BCM63158) && !defined(CONFIG_ARCH_ROCKCHIP) && \
+	!defined(CONFIG_ARCH_ASPEED)
 #include <asm/arch/gpio.h>
 #endif
 #include <asm-generic/gpio.h>
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index c6812f6..536f66a 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -421,6 +421,17 @@ config SPL_MMC_SDHCI_ADMA
 	  This enables support for the ADMA (Advanced DMA) defined
 	  in the SD Host Controller Standard Specification Version 3.00 in SPL.
 
+config MMC_SDHCI_ASPEED
+	bool "Aspeed SDHCI controller"
+	depends on ARCH_ASPEED
+	depends on DM_MMC
+	depends on MMC_SDHCI
+	help
+	  Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
+	  SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
+	  specifications. On the AST2600, the device is also compatible with
+	  MMC 5.1 and eMMC 3.0.
+
 config MMC_SDHCI_ATMEL
 	bool "Atmel SDHCI controller support"
 	depends on ARCH_AT91
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 6cc018b..5594195 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_JZ47XX_MMC) += jz_mmc.o
 
 # SDHCI
 obj-$(CONFIG_MMC_SDHCI)			+= sdhci.o
+obj-$(CONFIG_MMC_SDHCI_ASPEED)		+= aspeed_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_ATMEL)		+= atmel_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= bcm2835_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_BCMSTB)		+= bcmstb_sdhci.o
diff --git a/drivers/mmc/aspeed_sdhci.c b/drivers/mmc/aspeed_sdhci.c
new file mode 100644
index 0000000..1321ec3
--- /dev/null
+++ b/drivers/mmc/aspeed_sdhci.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 IBM Corp.
+ * Eddie James <eajames@linux.ibm.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <malloc.h>
+#include <sdhci.h>
+
+struct aspeed_sdhci_plat {
+	struct mmc_config cfg;
+	struct mmc mmc;
+};
+
+static int aspeed_sdhci_probe(struct udevice *dev)
+{
+	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+	struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
+	struct sdhci_host *host = dev_get_priv(dev);
+	u32 max_clk;
+	struct clk clk;
+	int ret;
+
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret)
+		return ret;
+
+	ret = clk_enable(&clk);
+	if (ret)
+		goto free;
+
+	host->name = dev->name;
+	host->ioaddr = (void *)devfdt_get_addr(dev);
+
+	max_clk = clk_get_rate(&clk);
+	if (IS_ERR_VALUE(max_clk)) {
+		ret = max_clk;
+		goto err;
+	}
+
+	host->max_clk = max_clk;
+	host->mmc = &plat->mmc;
+	host->mmc->dev = dev;
+	host->mmc->priv = host;
+	upriv->mmc = host->mmc;
+
+	ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
+	if (ret)
+		goto err;
+
+	ret = sdhci_probe(dev);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	clk_disable(&clk);
+free:
+	clk_free(&clk);
+	return ret;
+}
+
+static int aspeed_sdhci_bind(struct udevice *dev)
+{
+	struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
+
+	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static const struct udevice_id aspeed_sdhci_ids[] = {
+	{ .compatible = "aspeed,ast2400-sdhci" },
+	{ .compatible = "aspeed,ast2500-sdhci" },
+	{ .compatible = "aspeed,ast2600-sdhci" },
+	{ }
+};
+
+U_BOOT_DRIVER(aspeed_sdhci_drv) = {
+	.name		= "aspeed_sdhci",
+	.id		= UCLASS_MMC,
+	.of_match	= aspeed_sdhci_ids,
+	.ops		= &sdhci_ops,
+	.bind		= aspeed_sdhci_bind,
+	.probe		= aspeed_sdhci_probe,
+	.priv_auto_alloc_size = sizeof(struct sdhci_host),
+	.platdata_auto_alloc_size = sizeof(struct aspeed_sdhci_plat),
+};
-- 
1.8.3.1