From: Weijie Gao <weijie.gao@mediatek.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 25/26] configs: mtmips: change all boards to use mtk high-speed uart driver
Date: Thu, 29 Aug 2019 12:30:36 +0800 [thread overview]
Message-ID: <1567053036.2874.145.camel@mcddlt001> (raw)
In-Reply-To: <4da89d33-0321-5b92-fa48-50e0567da4b1@denx.de>
On Wed, 2019-08-28 at 15:57 +0200, Stefan Roese wrote:
> On 28.08.19 08:38, Weijie Gao wrote:
> > This patch changes all defconfig files of mtmips to use mtk high-speed
> > uart driver.
> >
> > This driver is compatible with ns16550a when baudrate <= 115200.
> >
> > Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
>
> As already suggested by Daniel, please move this change into a Kconfig "select"
> instead in the arch/mips platform.
>
> Thanks,
> Stefan
>
> > ---
> > configs/gardena-smart-gateway-mt7688-ram_defconfig | 2 +-
> > configs/gardena-smart-gateway-mt7688_defconfig | 2 +-
> > configs/linkit-smart-7688-ram_defconfig | 2 +-
> > configs/linkit-smart-7688_defconfig | 2 +-
> > include/configs/gardena-smart-gateway-mt7688.h | 2 +-
> > include/configs/linkit-smart-7688.h | 2 +-
> > 6 files changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/configs/gardena-smart-gateway-mt7688-ram_defconfig b/configs/gardena-smart-gateway-mt7688-ram_defconfig
> > index 1a1167b2a6..99010289e9 100644
> > --- a/configs/gardena-smart-gateway-mt7688-ram_defconfig
> > +++ b/configs/gardena-smart-gateway-mt7688-ram_defconfig
> > @@ -68,7 +68,7 @@ CONFIG_POWER_DOMAIN=y
> > CONFIG_RAM=y
> > CONFIG_DM_RESET=y
> > # CONFIG_SPL_SERIAL_PRESENT is not set
> > -CONFIG_SYS_NS16550=y
> > +CONFIG_MTK_SERIAL=y
> > CONFIG_SPI=y
> > CONFIG_MT7621_SPI=y
> > CONFIG_SYSRESET_SYSCON=y
> > diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig
> > index a456e3b575..1e270cb61d 100644
> > --- a/configs/gardena-smart-gateway-mt7688_defconfig
> > +++ b/configs/gardena-smart-gateway-mt7688_defconfig
> > @@ -71,7 +71,7 @@ CONFIG_POWER_DOMAIN=y
> > CONFIG_RAM=y
> > CONFIG_DM_RESET=y
> > # CONFIG_SPL_SERIAL_PRESENT is not set
> > -CONFIG_SYS_NS16550=y
> > +CONFIG_MTK_SERIAL=y
> > CONFIG_SPI=y
> > CONFIG_MT7621_SPI=y
> > CONFIG_SYSRESET_SYSCON=y
> > diff --git a/configs/linkit-smart-7688-ram_defconfig b/configs/linkit-smart-7688-ram_defconfig
> > index aa76633802..1e9cac5596 100644
> > --- a/configs/linkit-smart-7688-ram_defconfig
> > +++ b/configs/linkit-smart-7688-ram_defconfig
> > @@ -55,7 +55,7 @@ CONFIG_POWER_DOMAIN=y
> > CONFIG_RAM=y
> > CONFIG_DM_RESET=y
> > # CONFIG_SPL_SERIAL_PRESENT is not set
> > -CONFIG_SYS_NS16550=y
> > +CONFIG_MTK_SERIAL=y
> > CONFIG_SPI=y
> > CONFIG_MT7621_SPI=y
> > CONFIG_SYSRESET_SYSCON=y
> > diff --git a/configs/linkit-smart-7688_defconfig b/configs/linkit-smart-7688_defconfig
> > index 3750e59a4b..743cc48166 100644
> > --- a/configs/linkit-smart-7688_defconfig
> > +++ b/configs/linkit-smart-7688_defconfig
> > @@ -59,7 +59,7 @@ CONFIG_POWER_DOMAIN=y
> > CONFIG_RAM=y
> > CONFIG_DM_RESET=y
> > # CONFIG_SPL_SERIAL_PRESENT is not set
> > -CONFIG_SYS_NS16550=y
> > +CONFIG_MTK_SERIAL=y
> > CONFIG_SPI=y
> > CONFIG_MT7621_SPI=y
> > CONFIG_SYSRESET_SYSCON=y
> > diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h
> > index b3b89d2ab9..e83a96ad5e 100644
> > --- a/include/configs/gardena-smart-gateway-mt7688.h
> > +++ b/include/configs/gardena-smart-gateway-mt7688.h
> > @@ -22,7 +22,7 @@
> >
> > /* UART */
> > #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \
> > - 230400, 500000, 1500000 }
> > + 230400, 460800, 921600 }
> >
> > /* RAM */
> > #define CONFIG_SYS_MEMTEST_START 0x80100000
> > diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h
> > index 2adf38545a..4d30d98abf 100644
> > --- a/include/configs/linkit-smart-7688.h
> > +++ b/include/configs/linkit-smart-7688.h
> > @@ -22,7 +22,7 @@
> >
> > /* UART */
> > #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \
> > - 230400, 500000, 1500000 }
> > + 230400, 460800, 921600 }
> >
> > /* RAM */
> > #define CONFIG_SYS_MEMTEST_START 0x80100000
> >
>
> Viele Grüße,
> Stefan
>
Actually both ns16550a and mtk-hsuart can be used.
But it's OK to force to use mtk-hsuart.
next prev parent reply other threads:[~2019-08-29 4:30 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-28 6:37 [U-Boot] [PATCH 00/26] Add and update drivers for MediaTek MT76x8 SoCs Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 01/26] serial: serial_mtk: enable FIFO and disable flow control Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 02/26] serial: serial_mtk: add non-DM version for SPL Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 03/26] dts: mtmips: move uart property clock-frequency into mt7628an.dtsi Weijie Gao
2019-08-28 7:13 ` Stefan Roese
2019-08-28 6:37 ` [U-Boot] [PATCH 04/26] dts: mtmips: enable high-speed UART support for mt7628 Weijie Gao
2019-08-28 7:14 ` Stefan Roese
2019-08-28 6:37 ` [U-Boot] [PATCH 05/26] spi: mt7621-spi: remove data cache and rewrite its xfer function Weijie Gao
2019-08-28 7:55 ` Stefan Roese
2019-08-28 6:37 ` [U-Boot] [PATCH 06/26] spi: mt7621-spi: restore default register value after each xfer Weijie Gao
2019-08-28 8:01 ` Stefan Roese
2019-08-28 6:37 ` [U-Boot] [PATCH 07/26] pinctrl: add support for MediaTek MT7628 Weijie Gao
2019-08-28 12:26 ` Stefan Roese
2019-08-28 12:37 ` Stefan Roese
2019-08-29 3:04 ` Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 08/26] dts: mtmips: add pinctrl node for mt7628 Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 09/26] dts: mtmips: add default pinctrl for uart nodes Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 10/26] reset: add reset controller driver for MediaTek MIPS platform Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 11/26] dts: mtmips: update reset controller node for mt7628 Weijie Gao
2019-08-28 13:18 ` Stefan Roese
2019-08-29 3:18 ` Weijie Gao
2019-12-30 9:19 ` Mauro Condarelli
2019-12-30 10:22 ` Daniel Schwierzeck
2019-12-30 11:09 ` Mauro Condarelli
2019-12-30 12:14 ` Mauro Condarelli
2020-01-02 12:30 ` Stefan Roese
2020-01-02 13:36 ` Mauro Condarelli
2019-08-28 6:37 ` [U-Boot] [PATCH 12/26] clk: add clock gating driver for MediaTek MIPS platform Weijie Gao
2019-08-28 13:24 ` Daniel Schwierzeck
2019-08-29 3:25 ` Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 13/26] dts: mtmips: add gate clock node for mt7628 Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 14/26] phy: mt76x8-usb-phy: add slew rate calibration and remove non-mt7628 part Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 15/26] net: mt7628-eth: remove hardcoded gpio settings and regmap-based phy reset Weijie Gao
2019-08-28 13:32 ` Stefan Roese
2019-08-28 6:38 ` [U-Boot] [PATCH 16/26] net: mt7628-eth: remove phy link up detection Weijie Gao
2019-08-28 13:37 ` Stefan Roese
2019-08-29 3:32 ` Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 17/26] net: mt7628-eth: free rx descriptor on receiving failure Weijie Gao
2019-08-28 13:42 ` Stefan Roese
2019-08-28 6:38 ` [U-Boot] [PATCH 18/26] net: mt7628-eth: add support to isolate LAN/WAN ports Weijie Gao
2019-08-28 13:46 ` Stefan Roese
2019-08-29 4:27 ` Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 19/26] dts: mtmips: enable eth port0 led function for all boards Weijie Gao
2019-08-28 13:47 ` Stefan Roese
2019-08-28 6:38 ` [U-Boot] [PATCH 20/26] mmc: mtk-sd: add support for MediaTek MT7620/MT7628 SoCs Weijie Gao
2019-08-28 13:50 ` Stefan Roese
2019-08-29 4:28 ` Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 21/26] mmc: mtk-sd: add a dts property cd-active-high for builtin-cd mode Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 22/26] dts: mtmips: add mmc related nodes for mt7628an.dtsi Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 23/26] dts: mtmips: add default pinctrl for gardena-smart-gateway-mt7688 Weijie Gao
2019-08-28 13:52 ` Stefan Roese
2019-08-28 6:38 ` [U-Boot] [PATCH 24/26] dts: mtmips: add default pinctrl to eth nodes for all boards Weijie Gao
2019-08-28 13:55 ` Stefan Roese
2019-08-28 6:38 ` [U-Boot] [PATCH 25/26] configs: mtmips: change all boards to use mtk high-speed uart driver Weijie Gao
2019-08-28 13:57 ` Stefan Roese
2019-08-29 4:30 ` Weijie Gao [this message]
2019-08-28 6:38 ` [U-Boot] [PATCH 26/26] configs: mtmips: add necessary drivers for mtmips boards Weijie Gao
2019-08-28 13:35 ` Daniel Schwierzeck
2019-08-28 13:40 ` Stefan Roese
2019-08-29 3:34 ` Weijie Gao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1567053036.2874.145.camel@mcddlt001 \
--to=weijie.gao@mediatek.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox