[PATCH] ARM: tegra: p2371-2180: add I2C nodes to DT

[twarren at nvidia.com <twarren@nvidia.com>]

From: Tom Warren <twarren@nvidia.com>

This adds to the DT the I2C controllers that connect to the board ID 
EEPROM, camera board EEPROM, etc. With this change, you can now probe 
all I2C devices on a TX1 board.

Signed-off-by: Tom Warren <twarren@nvidia.com>
---
 arch/arm/dts/tegra210-p2371-2180.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/dts/tegra210-p2371-2180.dts b/arch/arm/dts/tegra210-p2371-2180.dts
index c2f497c..d982b5f 100644
--- a/arch/arm/dts/tegra210-p2371-2180.dts
+++ b/arch/arm/dts/tegra210-p2371-2180.dts
@@ -12,6 +12,9 @@
 
 	aliases {
 		i2c0 = "/i2c at 7000d000";
+		i2c2 = "/i2c at 7000c400";
+		i2c3 = "/i2c at 7000c500";
+		i2c5 = "/i2c at 546c0c00";
 		mmc0 = "/sdhci at 700b0600";
 		mmc1 = "/sdhci at 700b0000";
 		usb0 = "/usb at 7d000000";
@@ -33,6 +36,11 @@
 		};
 	};
 
+	i2c at 546c0c00 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
 	padctl at 7009f000 {
 		pinctrl-0 = <&padctl_default>;
 		pinctrl-names = "default";
@@ -85,6 +93,16 @@
 		non-removable;
 	};
 
+	i2c at 7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c at 7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
 	i2c at 7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
-- 
1.8.2.1.610.g562af5b


-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------