[PATCH v11 08/13] arm: dts: actions: s700: add u-boot specific dtsi file

[Amit Singh Tomar <amittomer25@gmail.com>]

Devices like uart and clk are needed to be enabled before relocation.
this patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v10:
        * No change.
Changes since v9:
        * Added Reviewed-by tag from Mani.
Changes since v8:
        * No changes.
Changes since v7:
        * No changes.
Changes since v6:
        * No changes.
Changes since v5:
        * Added reviwed-by tag.
Changes since v4:
        * Moved it to 08/11 to 06/11.
Changes since v3:
        * Replaced dtsi with dts in subject line along with arm:dts:
          to the prefix.
Changes since v2:
        * Added License.
Changes since v1:
        * This is newly added file that was *not* present in v1 and
          contains u-boot specific changes.
---
 arch/arm/dts/s700-u-boot.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 arch/arm/dts/s700-u-boot.dtsi

diff --git a/arch/arm/dts/s700-u-boot.dtsi b/arch/arm/dts/s700-u-boot.dtsi
new file mode 100644
index 0000000..a527ccc
--- /dev/null
+++ b/arch/arm/dts/s700-u-boot.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Amit Singh Tomar <amittomer25@gmail.com>
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart3 {
+	u-boot,dm-pre-reloc;
+};
+
+&cmu {
+	u-boot,dm-pre-reloc;
+};
-- 
2.7.4