From mboxrd@z Thu Jan  1 00:00:00 1970
From: Kurt Miller <kurt@intricatesoftware.com>
Date: Thu, 28 May 2020 14:42:12 -0400
Subject: [PATCH v2 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64
In-Reply-To: <20200525090057.6076-2-kettenis@openbsd.org>
References: <20200525090057.6076-1-kettenis@openbsd.org>
 <20200525090057.6076-2-kettenis@openbsd.org>
Message-ID: <1590691332.9708.27.camel@intricatesoftware.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Mon, 2020-05-25 at 11:00 +0200, Mark Kettenis wrote:
> Enable CONFIG_PCI and CONFIG_NVME and related configs for the
> ROCKPro64 board.
> 
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>

Tested by: Kurt Miller <kurt@intricatesoftware.com>

Model: Pine64 RockPro64 v2.1

=> pci
Scanning PCI devices on bus 0
BusDevFun??VendorId???DeviceId???Device Class???????Sub-Class
_____________________________________________________________
00.00.00???0x1d87?????0x0100?????Bridge device???????????0x04
=> pci 1
Scanning PCI devices on bus 1
BusDevFun??VendorId???DeviceId???Device Class???????Sub-Class
_____________________________________________________________
01.00.00???0x1b4b?????0x9128?????Mass storage controller 0x06

> ---
> Changes in v2:
> - Extend commit message
> 
> ?configs/rockpro64-rk3399_defconfig | 4 ++++
> ?1 file changed, 4 insertions(+)
> 
> diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
> index 95037a191d..b472167283 100644
> --- a/configs/rockpro64-rk3399_defconfig
> +++ b/configs/rockpro64-rk3399_defconfig
> @@ -19,6 +19,7 @@ CONFIG_CMD_BOOTZ=y
> ?CONFIG_CMD_GPT=y
> ?CONFIG_CMD_MMC=y
> ?CONFIG_CMD_USB=y
> +CONFIG_CMD_PCI=y
> ?# CONFIG_CMD_SETEXPR is not set
> ?CONFIG_CMD_TIME=y
> ?CONFIG_SPL_OF_CONTROL=y
> @@ -38,10 +39,13 @@ CONFIG_SPI_FLASH_GIGADEVICE=y
> ?CONFIG_DM_ETH=y
> ?CONFIG_ETH_DESIGNWARE=y
> ?CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_NVME=y
> +CONFIG_PCI=y
> ?CONFIG_PMIC_RK8XX=y
> ?CONFIG_REGULATOR_PWM=y
> ?CONFIG_REGULATOR_RK8XX=y
> ?CONFIG_PWM_ROCKCHIP=y
> +CONFIG_DM_RESET=y
> ?CONFIG_RAM_RK3399_LPDDR4=y
> ?CONFIG_BAUDRATE=115200
> ?CONFIG_DEBUG_UART_SHIFT=2