From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ye Li <ye.li@nxp.com>
Date: Mon, 29 Jun 2020 09:51:06 +0000
Subject: [EXT] [PATCH 1/1] power: pmic_pca9450: fix PCA9450A I2C address
In-Reply-To: <20200629084215.25006-1-sebastien.szymanski@armadeus.com>
References: <20200629084215.25006-1-sebastien.szymanski@armadeus.com>
Message-ID: <1593424001.29491.3.camel@nxp.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Mon, 2020-06-29 at 10:42 +0200, S?bastien Szymanski wrote:
> Caution: EXT Email
> 
> PCA9450A I2C address is 0x25. Fix it.
> 
> Signed-off-by: S?bastien Szymanski <sebastien.szymanski@armadeus.com>
> ---
> ?drivers/power/pmic/pmic_pca9450.c | 2 +-
> ?1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/power/pmic/pmic_pca9450.c
> b/drivers/power/pmic/pmic_pca9450.c
> index 67a9090200..c0fb78c4cd 100644
> --- a/drivers/power/pmic/pmic_pca9450.c
> +++ b/drivers/power/pmic/pmic_pca9450.c
> @@ -23,7 +23,7 @@ int power_pca9450a_init(unsigned char bus)
> ????????p->name = pca9450_name;
> ????????p->interface = PMIC_I2C;
> ????????p->number_of_regs = PCA9450_REG_NUM;
> -???????p->hw.i2c.addr = 0x35;
> +???????p->hw.i2c.addr = 0x25;

The address 0x35 is correct for PCA9540A. You are probably using
PCA9540B/C which address is 0x25. If so, please
call?power_pca9450b_init.

Best regards,
Ye Li
> ????????p->hw.i2c.tx_num = 1;
> ????????p->bus = bus;
> 
> --
> 2.26.2
>