From: Patrick DELAUNAY <patrick.delaunay@st.com>
To: u-boot@lists.denx.de
Subject: [PULL] Pull request for u-boot master = u-boot-stm32-20201125
Date: Wed, 25 Nov 2020 14:55:02 +0000 [thread overview]
Message-ID: <1606316102821.13856@st.com> (raw)
Hi Tom,
Please pull the STM32 related patches for u-boot/master, v2021.01: u-boot-stm32-20201125
- STM32 MCU's DT update
- Add DHCOM based STM32MP15x PicoITX board
- Correct ALIGN macro usage for on syram for SPL dcache support
- Fixes on DHCOM: uSD card-detect GPIO and Drop QSPI CS2
- Fix compilation issue for spl_mmc_boot_partition
- Fix MTD partitions for serial boot
- Add support of MCU HOLD BOOT with reset for stm32 remoteproc
(prepare alligneent with kernel DT)
- Correct bias information and support in STM32 soc and STMFX
- Support optional vbus in usbphyc
- Update FIT examples to avoid kernel zImage relocation before decompression
CI status:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm/-/commits/u-boot-stm32-20201125
Thanks,
Patrick
git request-pull origin/master https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git u-boot-stm32-20201125
The following changes since commit d361eafe82bfbf90ab0a592ae59daef99faee5ec:
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb (2020-11-22 11:00:11 -0500)
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20201125
for you to fetch changes up to 60a2dd6aa20f6c0938856b764e7ebdee722d998e:
board: st: stm32mp1: update load address for FIT examples (2020-11-25 14:27:19 +0100)
----------------------------------------------------------------
- STM32 MCU's DT update
- Add DHCOM based STM32MP15x PicoITX board
- Correct ALIGN macro usage for on syram for SPL dcache support
- Fixes on DHCOM: uSD card-detect GPIO and Drop QSPI CS2
- Fix compilation issue for spl_mmc_boot_partition
- Fix MTD partitions for serial boot
- Add support of MCU HOLD BOOT with reset for stm32 remoteproc
(prepare alligneent with kernel DT)
- Correct bias information and support in STM32 soc and STMFX
- Support optional vbus in usbphyc
- Update FIT examples to avoid kernel zImage relocation before decompression
----------------------------------------------------------------
Marek Vasut (3):
ARM: dts: stm32: Add DHCOM based PicoITX board
ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM
ARM: dts: stm32: Drop QSPI CS2 on DHCOM
Patrice Chotard (4):
ARM: dts: sync armv7-m.dtsi with kernel v5.10-rc1
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
ARM: dts: stm32: Fix timer initialization for stm32 MCU's board
ARM: dts: stm32: Fix typo in stm32h7-u-boot.dtsi
Patrick Delaunay (11):
arm: stm32mp: correct the ALIGN macro usage
board: stm32mp1: no MTD partitions fixup for serial boot
reset: stm32: Add support of MCU HOLD BOOT
remoteproc: stm32: use reset for hold boot
remoteproc: stm32: update error management in stm32_copro_start
pinctrl: stm32: display bias information for all pins
gpio: stm32: correct the bias management
pinctrl: stmfx: update pincontrol and gpio device name
pinctrl: stmfx: update pin name
phy: stm32: usbphyc: manage optional vbus regulator on phy_power_on/off
board: st: stm32mp1: update load address for FIT examples
Richard Genoud (1):
SPL: stm32mp1: fix spl_mmc_boot_partition not defined
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armv7-m.dtsi | 4 +--
arch/arm/dts/stm32429i-eval-u-boot.dtsi | 6 ++++-
arch/arm/dts/stm32429i-eval.dts | 21 ++++++++++-----
arch/arm/dts/stm32746g-eval-u-boot.dtsi | 4 +--
arch/arm/dts/stm32746g-eval.dts | 13 +++++-----
arch/arm/dts/stm32f4-pinctrl.dtsi | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------
arch/arm/dts/stm32f429-disco-u-boot.dtsi | 6 ++++-
arch/arm/dts/stm32f429-disco.dts | 99 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
arch/arm/dts/stm32f429.dtsi | 30 +++++++++++++++-------
arch/arm/dts/stm32f469-disco-u-boot.dtsi | 26 +++++++++++--------
arch/arm/dts/stm32f469-disco.dts | 19 +++++++++-----
arch/arm/dts/stm32f469.dtsi | 1 -
arch/arm/dts/stm32f7-pinctrl.dtsi | 22 ++++++++--------
arch/arm/dts/stm32f7-u-boot.dtsi | 3 +--
arch/arm/dts/stm32f746-disco-u-boot.dtsi | 8 ++----
arch/arm/dts/stm32f746-disco.dts | 2 +-
arch/arm/dts/stm32f746.dtsi | 12 ++++-----
arch/arm/dts/stm32f769-disco-u-boot.dtsi | 4 +--
arch/arm/dts/stm32f769-disco.dts | 6 ++---
arch/arm/dts/stm32h7-u-boot.dtsi | 6 ++++-
arch/arm/dts/stm32h743-pinctrl.dtsi | 10 ++++----
arch/arm/dts/stm32h743.dtsi | 37 +++++++++++++++++++--------
arch/arm/dts/stm32h743i-disco.dts | 2 +-
arch/arm/dts/stm32h743i-eval.dts | 2 +-
arch/arm/dts/stm32mp15-u-boot.dtsi | 7 +++++
arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi | 14 ++++++++++
arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/dts/stm32mp15xx-dhcom.dtsi | 15 +++--------
arch/arm/mach-stm32mp/cpu.c | 4 +--
arch/arm/mach-stm32mp/spl.c | 2 ++
board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its | 22 ++++++++++++++++
board/st/stm32mp1/fit_copro_kernel_dtb.its | 18 +++++++++++--
board/st/stm32mp1/fit_kernel_dtb.its | 6 ++---
board/st/stm32mp1/stm32mp1.c | 11 +++++---
configs/stm32mp15_dhcom_basic_defconfig | 2 +-
doc/device-tree-bindings/phy/phy-stm32-usbphyc.txt | 2 ++
drivers/gpio/stm32_gpio.c | 28 ++++++++++----------
drivers/phy/phy-stm32-usbphyc.c | 33 ++++++++++++++++--------
drivers/pinctrl/pinctrl-stmfx.c | 13 ++++++----
drivers/pinctrl/pinctrl_stm32.c | 24 ++++++++---------
drivers/remoteproc/stm32_copro.c | 108 +++++++++++++++++++++++------------------------------------------------------
drivers/reset/stm32-reset.c | 17 +++++++++---
include/dt-bindings/reset/stm32mp1-resets.h | 1 +
44 files changed, 611 insertions(+), 260 deletions(-)
create mode 100644 arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts
next reply other threads:[~2020-11-25 14:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-25 14:55 Patrick DELAUNAY [this message]
2020-11-26 3:52 ` [PULL] Pull request for u-boot master = u-boot-stm32-20201125 Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1606316102821.13856@st.com \
--to=patrick.delaunay@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox