[PATCH 2/6] clk: actions: Add SD/MMC clocks

[Amit Singh Tomar <atomar25opensource@gmail.com>]

From: Amit Singh Tomar <amittomer25@gmail.com>

This commit adds SD/MMC clocks, and provides .set/get_rate callbacks
for SD/MMC device present on Actions OWL S700 SoCs.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
 drivers/clk/owl/clk_owl.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/owl/clk_owl.h |  2 ++
 2 files changed, 68 insertions(+)

diff --git a/drivers/clk/owl/clk_owl.c b/drivers/clk/owl/clk_owl.c
index c9bc5c2..49a492c 100644
--- a/drivers/clk/owl/clk_owl.c
+++ b/drivers/clk/owl/clk_owl.c
@@ -92,6 +92,9 @@ int owl_clk_enable(struct clk *clk)
 		setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_ETH);
 		setbits_le32(priv->base + CMU_ETHERNETPLL, 5);
 		break;
+	case CLK_SD0:
+		setbits_le32(priv->base + CMU_DEVCLKEN0, CMU_DEVCLKEN0_SD0);
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -121,6 +124,9 @@ int owl_clk_disable(struct clk *clk)
 	case CLK_ETHERNET:
 		clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_ETH);
 		break;
+	case CLK_SD0:
+		clrbits_le32(priv->base + CMU_DEVCLKEN0, CMU_DEVCLKEN0_SD0);
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -128,12 +134,69 @@ int owl_clk_disable(struct clk *clk)
 	return 0;
 }
 
+static ulong owl_get_sd_clk_rate(struct owl_clk_priv *priv, int sd_index)
+{
+	ulong parent_rate;
+	uint div = 1;
+
+	/* Clock output of DEV_PLL
+	 * Range: 48M ~ 756M
+	 * Frequency= DEVPLLCLK * 6
+	 */
+	parent_rate = readl(priv->base + CMU_DEVPLL) & 0x7f;
+	parent_rate *= 6000000;
+
+	div += readl(priv->base + (CMU_SD0CLK + sd_index*0x4)) & 0x1f;
+
+	return (parent_rate / div);
+}
+
+static ulong owl_set_sd_clk_rate(struct owl_clk_priv *priv, ulong rate,
+				 int sd_index)
+{
+	ulong parent_rate;
+	uint div = 1, val;
+
+	/* Clock output of DEV_PLL
+	 * Range: 48M ~ 756M
+	 * Frequency= DEVPLLCLK * 6
+	 */
+	parent_rate = readl(priv->base + CMU_DEVPLL) & 0x7f;
+	parent_rate *= 6000000;
+
+	rate *= 2;
+	div = (parent_rate / rate) - 1;
+
+	if (div >= 128)
+		div |= 0x100;
+
+	val = readl(priv->base + (CMU_SD0CLK + sd_index*0x4));
+	/* Bits 4..0 is used to program div value */
+	val &= ~0x1f;
+	val |= div;
+	/* As per Manuals Bits 31..10 are reserved but Bits 11 and
+	 * 10 needed to be set for proper operation
+	 */
+	val |= 0xc00;
+	/* Bit 9 and 8 must be cleared */
+	if (div < 128)
+		val &= ~0x300;
+	else
+		val &= ~0x200;
+	writel(val, priv->base + (CMU_SD0CLK + sd_index*0x4));
+
+	return owl_get_sd_clk_rate(priv, 0);
+}
+
 static ulong owl_clk_get_rate(struct clk *clk)
 {
 	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
 	ulong rate;
 
 	switch (clk->id) {
+	case CLK_SD0:
+		rate = owl_get_sd_clk_rate(priv, 0);
+		break;
 	default:
 		return -ENOENT;
 	}
@@ -147,6 +210,9 @@ static ulong owl_clk_set_rate(struct clk *clk, ulong rate)
 	ulong new_rate;
 
 	switch (clk->id) {
+	case CLK_SD0:
+		new_rate = owl_set_sd_clk_rate(priv, rate, 0);
+		break;
 	default:
 		return -ENOENT;
 	}
diff --git a/drivers/clk/owl/clk_owl.h b/drivers/clk/owl/clk_owl.h
index a01f81a..ee5eba4 100644
--- a/drivers/clk/owl/clk_owl.h
+++ b/drivers/clk/owl/clk_owl.h
@@ -62,4 +62,6 @@ struct owl_clk_priv {
 #define CMU_DEVCLKEN1_UART5	BIT(21)
 #define CMU_DEVCLKEN1_UART3	BIT(11)
 
+#define CMU_DEVCLKEN0_SD0	BIT(22)
+
 #endif
-- 
2.7.4