From: Masami Hiramatsu <masami.hiramatsu@linaro.org>
To: u-boot@lists.denx.de
Subject: [PATCH v2 13/13] configs: synquacer: Enable EFI capsule update support
Date: Sat, 17 Apr 2021 08:39:31 +0900 [thread overview]
Message-ID: <161861637084.298230.5043068311379698230.stgit@localhost> (raw)
In-Reply-To: <161861622792.298230.15803163505976731363.stgit@localhost>
Enable EFI capsule update support. With the EFI capsule update,
you can update U-Boot, TF-A and OP-TEE. TF-A and OP-TEE are
usually combined as a FIP binary, but if the binary is bigger
than 480KB, you have to modify FIP header, split the OP-TEE
and stores the OP-TEE binary in the different place. This
configuration supports both cases.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
---
configs/synquacer_developerbox_defconfig | 15 +++++++++++++++
include/configs/synquacer.h | 6 ++++++
2 files changed, 21 insertions(+)
diff --git a/configs/synquacer_developerbox_defconfig b/configs/synquacer_developerbox_defconfig
index c0d6fa49c0..a0bbbfdd0f 100644
--- a/configs/synquacer_developerbox_defconfig
+++ b/configs/synquacer_developerbox_defconfig
@@ -91,3 +91,18 @@ CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_STORAGE=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_DFU=y
+CONFIG_DFU_TFTP=y
+CONFIG_DFU_MTD=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+CONFIG_DFU_SF_PART=y
+CONFIG_FIT=y
+CONFIG_OF_LIBFDT=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_ERASEENV=y
diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
index b2dd6d0f0f..5eeb16ce1c 100644
--- a/include/configs/synquacer.h
+++ b/include/configs/synquacer.h
@@ -58,6 +58,11 @@
/* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
/* #define CONFIG_SYS_PCI_64BIT 1 */
+#define DEFAULT_DFU_ALT_INFO "dfu_alt_info='" \
+ "mtd nor1=u-boot.bin raw 200000 100000;" \
+ "fip.bin raw 180000 78000;" \
+ "optee.bin raw 500000 100000'\0"
+
/* Distro boot settings */
#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_CMD_USB
@@ -101,6 +106,7 @@
"ramdisk_addr_r=0xa0000000\0" \
"scriptaddr=0x88000000\0" \
"pxefile_addr_r=0x88100000\0" \
+ DEFAULT_DFU_ALT_INFO \
BOOTENV
#endif /* __CONFIG_H */
prev parent reply other threads:[~2021-04-16 23:39 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-16 23:37 [PATCH v2 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support Masami Hiramatsu
2021-04-16 23:37 ` [PATCH v2 01/13] ata: ahci-pci: Use scsi_ops to initialize ops Masami Hiramatsu
2021-04-16 23:37 ` [PATCH v2 02/13] dm: pci: Skip setting VGA bridge bits if parent device is the host bus Masami Hiramatsu
2021-04-16 23:37 ` [PATCH v2 03/13] efi: Fix to use null handle to create new handle for efi_fmp_raw Masami Hiramatsu
2021-04-16 23:37 ` [PATCH v2 04/13] gpio: Introduce CONFIG_ONLY_GENERIC_GPIO to cleanup #ifdefs Masami Hiramatsu
2021-04-29 16:09 ` Simon Glass
2021-04-30 2:03 ` Masami Hiramatsu
2021-04-30 18:13 ` Simon Glass
2021-05-03 11:51 ` Tom Rini
2021-05-06 2:28 ` Masami Hiramatsu
2021-04-16 23:38 ` [PATCH v2 05/13] mtd: spi-nor-ids: add support for Macronix mx25u51245g and mx66u1g45g flash Masami Hiramatsu
2021-04-19 8:41 ` Pratyush Yadav
2021-04-21 2:39 ` Masami Hiramatsu
2021-04-21 11:15 ` Pratyush Yadav
2021-04-16 23:38 ` [PATCH v2 06/13] pci: synquacer: Add SynQuacer ECAM based PCIe driver Masami Hiramatsu
2021-04-16 23:38 ` [PATCH v2 07/13] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver Masami Hiramatsu
2021-04-19 22:05 ` Jaehoon Chung
2021-04-20 0:59 ` Masami Hiramatsu
2021-04-20 5:35 ` Jaehoon Chung
2021-04-25 22:05 ` Jassi Brar
2021-04-25 23:06 ` Jaehoon Chung
2021-04-16 23:38 ` [PATCH v2 08/13] spi: synquacer: Add HSSPI SPI controller driver for SynQuacer Masami Hiramatsu
2021-04-16 23:38 ` [PATCH v2 09/13] net: synquacer: Add netsec driver Masami Hiramatsu
2021-04-23 0:16 ` Ramon Fried
2021-04-16 23:38 ` [PATCH v2 10/13] ARM: dts: synquacer: Add device trees for DeveloperBox Masami Hiramatsu
2021-04-16 23:39 ` [PATCH v2 11/13] board: synquacer: Add DeveloperBox 96boards EE support Masami Hiramatsu
2021-04-21 2:40 ` Masami Hiramatsu
2021-04-16 23:39 ` [PATCH v2 12/13] doc: qemu: arm64: Fix the documentation of capsule update Masami Hiramatsu
2021-04-17 18:21 ` Heinrich Schuchardt
2021-04-18 8:07 ` Sughosh Ganu
2021-04-19 0:37 ` Takahiro Akashi
2021-04-19 2:24 ` Masami Hiramatsu
2021-04-19 2:35 ` Heinrich Schuchardt
2021-04-20 6:16 ` Takahiro Akashi
2021-04-16 23:39 ` Masami Hiramatsu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=161861637084.298230.5043068311379698230.stgit@localhost \
--to=masami.hiramatsu@linaro.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox