[PATCH v5 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support

[Masami Hiramatsu <masami.hiramatsu@linaro.org>]

Hi,

Here is the 5th version of the series (including some fixes for build
errors) to add SynQuacer/DeveloperBox 96board EE suport on U-Boot.

This series includes not only DeveloperBox support but also some fixes
for the issues which I faced while porting U-Boot on the DeveloperBox.
First 3 patches are fixes, next 1 patch is a code cleanup for generic
gpio for arm. The next 7 patches adding DeveloperBox devices
and board support. The last 2 patches are related to the UEFI capsule
update.

Previous version is here:

 https://lists.denx.de/pipermail/u-boot/2021-May/449305.html


Changes in v5
-------------

I dripped dfu_mtd bugfix patch (previous [12/14]) from this,
because Sughosh already fixed it.

[11/13]:
  - Remove log level from config.


DeveloperBox
============

DeveloperBox is a certified 96boards Enterprise Edition board. The board/SoC has: -
* Socionext SC2A11 24-cores ARM Cortex-A53 on tbe Mini-ATX form factor motherboard
* 4 DIMM slots (4GB DDR4-2400 UDIMM shipped by default)
* 1 4xPCIe Gen2 slot and 2 1xPCIe Gen2 slots
  (1x slots are connected via PCIe bridge chip)
* 4 USB-3.0 ports
* 2 SATA ports
* 1 GbE network port
* 1 USB-UART serial port (micro USB)
* 64MB SPI NOR Flash
* 8GB eMMC Flash Storage
* 96boards LS connector

The DeveloperBox schematic can be found here: -
https://www.96boards.org/documentation/enterprise/developerbox/hardware-docs/mzsc2am_v03_20180115_a.pdf

And the other documents can be found here: -
https://www.96boards.org/documentation/enterprise/developerbox/


Currently, the U-Boot port supports: -
* USB
* eMMC
* SPI-NOR
* SATA
* GbE

The DeveloperBox boots the TF-A and EDK2 as a main bootloader by default.
The DeveloperBox U-Boot port will replace the EDK2 and boot from TF-A as
BL33, but no need to combine with it.


Thank you,

---

Jassi Brar (4):
      mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver
      spi: synquacer: Add HSSPI SPI controller driver for SynQuacer
      net: synquacer: Add netsec driver
      i2c: synquacer: SNI Synquacer I2C controller

Masami Hiramatsu (9):
      ata: ahci-pci: Use scsi_ops to initialize ops
      dm: pci: Skip setting VGA bridge bits if parent device is the host bus
      efi: Fix to use null handle to create new handle for efi_fmp_raw
      gpio: Introduce CONFIG_GPIO_EXTRA_HEADER to cleanup #ifdefs
      pci: synquacer: Add SynQuacer ECAM based PCIe driver
      ARM: dts: synquacer: Add device trees for DeveloperBox
      board: synquacer: Add DeveloperBox 96boards EE support
      doc: qemu: arm64: Fix the documentation of capsule update
      configs: synquacer: Enable EFI capsule update support


 arch/arm/Kconfig                                   |  108 ++
 arch/arm/dts/Makefile                              |    2 
 arch/arm/dts/synquacer-sc2a11-caches.dtsi          |   73 +
 .../dts/synquacer-sc2a11-developerbox-u-boot.dtsi  |   75 +
 arch/arm/dts/synquacer-sc2a11-developerbox.dts     |   56 +
 arch/arm/dts/synquacer-sc2a11.dtsi                 |  595 ++++++++++
 arch/arm/include/asm/gpio.h                        |    8 
 board/socionext/developerbox/Kconfig               |   36 +
 board/socionext/developerbox/MAINTAINERS           |   14 
 board/socionext/developerbox/Makefile              |    9 
 board/socionext/developerbox/developerbox.c        |  146 +++
 configs/synquacer_developerbox_defconfig           |  129 ++
 doc/board/emulation/qemu_capsule_update.rst        |   11 
 doc/board/index.rst                                |    1 
 doc/board/socionext/developerbox.rst               |   87 ++
 doc/board/socionext/index.rst                      |    9 
 drivers/ata/ahci-pci.c                             |    2 
 drivers/i2c/Kconfig                                |    7 
 drivers/i2c/Makefile                               |    1 
 drivers/i2c/synquacer_i2c.c                        |  338 ++++++
 drivers/mmc/Kconfig                                |   10 
 drivers/mmc/Makefile                               |    1 
 drivers/mmc/f_sdh30.c                              |   81 +
 drivers/net/Kconfig                                |    8 
 drivers/net/Makefile                               |    1 
 drivers/net/sni_netsec.c                           | 1134 ++++++++++++++++++++
 drivers/pci/Kconfig                                |   12 
 drivers/pci/Makefile                               |    1 
 drivers/pci/pci-uclass.c                           |    3 
 drivers/pci/pcie_ecam_synquacer.c                  |  600 +++++++++++
 drivers/spi/Kconfig                                |    8 
 drivers/spi/Makefile                               |    1 
 drivers/spi/spi-synquacer.c                        |  491 +++++++++
 include/configs/synquacer.h                        |  115 ++
 lib/efi_loader/efi_capsule.c                       |    2 
 35 files changed, 4158 insertions(+), 17 deletions(-)
 create mode 100644 arch/arm/dts/synquacer-sc2a11-caches.dtsi
 create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi
 create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox.dts
 create mode 100644 arch/arm/dts/synquacer-sc2a11.dtsi
 create mode 100644 board/socionext/developerbox/Kconfig
 create mode 100644 board/socionext/developerbox/MAINTAINERS
 create mode 100644 board/socionext/developerbox/Makefile
 create mode 100644 board/socionext/developerbox/developerbox.c
 create mode 100644 configs/synquacer_developerbox_defconfig
 create mode 100644 doc/board/socionext/developerbox.rst
 create mode 100644 doc/board/socionext/index.rst
 create mode 100644 drivers/i2c/synquacer_i2c.c
 create mode 100644 drivers/mmc/f_sdh30.c
 create mode 100644 drivers/net/sni_netsec.c
 create mode 100644 drivers/pci/pcie_ecam_synquacer.c
 create mode 100644 drivers/spi/spi-synquacer.c
 create mode 100644 include/configs/synquacer.h

--
Masami Hiramatsu <masami.hiramatsu@linaro.org>