[PATCH 0/6] arm64: synquacer: DeveloperBox updates

[Masami Hiramatsu <masami.hiramatsu@linaro.org>]

Hi,

Here is the series of patches to update the DeveloperBox support.

[1/6] board: synquacer: Initialize SCBM SMMU at board_init()
   - This is a driver cleanup, split the SMMU setup from the driver.

[2/6] configs: synquacer: Make U-Boot binary position independent
  - This makes U-Boot position independent for usability.

[3/6] dts: synquacer: Add partition information to the spi-nor
[4/6] configs: synquacer: Remove mtdparts settings and update DFU setting
  - These are the fixes according to the MTD subsystem update.
    (Thanks Marek!)

[5/6] configs: synquacer: Drop Ext2/4 support by default
[6/6] configs: synquacer: Enable UEFI secure boot
  - These are making U-Boot more likely to EDK2 behaviors.


Thank you,

---

Masami Hiramatsu (6):
      board: synquacer: Initialize SCBM SMMU at board_init()
      configs: synquacer: Make U-Boot binary position independent
      dts: synquacer: Add partition information to the spi-nor
      configs: synquacer: Remove mtdparts settings and update DFU setting
      configs: synquacer: Drop Ext2/4 support by default
      configs: synquacer: Enable UEFI secure boot


 .../dts/synquacer-sc2a11-developerbox-u-boot.dtsi  |   42 ++++++++++++++++++++
 board/socionext/developerbox/developerbox.c        |   15 +++++++
 configs/synquacer_developerbox_defconfig           |    9 ++--
 drivers/net/sni_netsec.c                           |    7 ---
 include/configs/synquacer.h                        |    2 -
 5 files changed, 62 insertions(+), 13 deletions(-)

--
Masami Hiramatsu <masami.hiramatsu@linaro.org>