From: Masami Hiramatsu <masami.hiramatsu@linaro.org>
To: Lukasz Majewski <lukma@denx.de>
Cc: u-boot@lists.denx.de, ilias.apalodimas@linaro.org,
sughosh.ganu@linaro.org, jaswinder.singh@linaro.org
Subject: [PATCH 2/5] DFU: Accept redundant spaces and tabs in dfu_alt_info
Date: Mon, 6 Dec 2021 14:44:46 +0900 [thread overview]
Message-ID: <163876948624.38238.2558454766729057172.stgit@localhost> (raw)
In-Reply-To: <163876946986.38238.10896882043017582609.stgit@localhost>
If dfu_alt_info has repeated spaces or tab (for indentation or
readability), the dfu fails to parse it. For example, if
dfu_alt_info="mtd nor1=image raw 100000 200000" (double spaces
after "raw"), the image entity start address is '0' and the size
'0x100000'. This is because the repeated space is not skipped.
Use space and tab as a separater and apply skip_spaces() to
skip redundant spaces and tabs.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
---
drivers/dfu/dfu.c | 6 ++++--
drivers/dfu/dfu_mmc.c | 11 ++++++++---
drivers/dfu/dfu_mtd.c | 8 ++++++--
drivers/dfu/dfu_nand.c | 11 ++++++++---
drivers/dfu/dfu_ram.c | 3 ++-
drivers/dfu/dfu_sf.c | 12 +++++++++---
6 files changed, 37 insertions(+), 14 deletions(-)
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 66c41b5e76..18154774f9 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -123,9 +123,10 @@ int dfu_config_interfaces(char *env)
s = env;
while (s) {
ret = -EINVAL;
- i = strsep(&s, " ");
+ i = strsep(&s, " \t");
if (!i)
break;
+ s = skip_spaces(s);
d = strsep(&s, "=");
if (!d)
break;
@@ -502,8 +503,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt,
char *st;
debug("%s: %s interface: %s dev: %s\n", __func__, s, interface, devstr);
- st = strsep(&s, " ");
+ st = strsep(&s, " \t");
strlcpy(dfu->name, st, DFU_NAME_SIZE);
+ s = skip_spaces(s);
dfu->alt = alt;
dfu->max_buf_size = 0;
diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c
index 3dab5a5f63..d747ede66c 100644
--- a/drivers/dfu/dfu_mmc.c
+++ b/drivers/dfu/dfu_mmc.c
@@ -351,11 +351,12 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s)
dfu->data.mmc.dev_num = dectoul(devstr, NULL);
for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) {
- *parg = strsep(&s, " ");
+ *parg = strsep(&s, " \t");
if (*parg == NULL) {
pr_err("Invalid number of arguments.\n");
return -ENODEV;
}
+ s = skip_spaces(s);
}
entity_type = argv[0];
@@ -390,9 +391,11 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s)
* specifying the mmc HW defined partition number
*/
if (s)
- if (!strcmp(strsep(&s, " "), "mmcpart"))
+ if (!strcmp(strsep(&s, " \t"), "mmcpart")) {
+ s = skip_spaces(s);
dfu->data.mmc.hw_partition =
simple_strtoul(s, NULL, 0);
+ }
} else if (!strcmp(entity_type, "part")) {
struct disk_partition partinfo;
@@ -412,8 +415,10 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s)
* specifying the mmc HW defined partition number
*/
if (s)
- if (!strcmp(strsep(&s, " "), "offset"))
+ if (!strcmp(strsep(&s, " \t"), "offset")) {
+ s = skip_spaces(s);
offset = simple_strtoul(s, NULL, 0);
+ }
dfu->layout = DFU_RAW_ADDR;
dfu->data.mmc.lba_start = partinfo.start + offset;
diff --git a/drivers/dfu/dfu_mtd.c b/drivers/dfu/dfu_mtd.c
index 0b7f17761f..ee534a9d10 100644
--- a/drivers/dfu/dfu_mtd.c
+++ b/drivers/dfu/dfu_mtd.c
@@ -12,6 +12,7 @@
#include <mtd.h>
#include <jffs2/load_kernel.h>
#include <linux/err.h>
+#include <linux/ctype.h>
static bool mtd_is_aligned_with_block_size(struct mtd_info *mtd, u64 size)
{
@@ -265,11 +266,14 @@ int dfu_fill_entity_mtd(struct dfu_entity *dfu, char *devstr, char *s)
dfu->data.mtd.info = mtd;
dfu->max_buf_size = mtd->erasesize;
- st = strsep(&s, " ");
+ st = strsep(&s, " \t");
+ s = skip_spaces(s);
if (!strcmp(st, "raw")) {
dfu->layout = DFU_RAW_ADDR;
dfu->data.mtd.start = hextoul(s, &s);
- s++;
+ if (!isspace(*s))
+ return -1;
+ s = skip_spaces(s);
dfu->data.mtd.size = hextoul(s, &s);
} else if ((!strcmp(st, "part")) || (!strcmp(st, "partubi"))) {
char mtd_id[32];
diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c
index e53b35e42b..76761939ab 100644
--- a/drivers/dfu/dfu_nand.c
+++ b/drivers/dfu/dfu_nand.c
@@ -201,11 +201,14 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s)
dfu->data.nand.ubi = 0;
dfu->dev_type = DFU_DEV_NAND;
- st = strsep(&s, " ");
+ st = strsep(&s, " \t");
+ s = skip_spaces(s);
if (!strcmp(st, "raw")) {
dfu->layout = DFU_RAW_ADDR;
dfu->data.nand.start = hextoul(s, &s);
- s++;
+ if (!isspace(*s))
+ return -1;
+ s = skip_spaces(s);
dfu->data.nand.size = hextoul(s, &s);
} else if ((!strcmp(st, "part")) || (!strcmp(st, "partubi"))) {
char mtd_id[32];
@@ -216,7 +219,9 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s)
dfu->layout = DFU_RAW_ADDR;
dev = dectoul(s, &s);
- s++;
+ if (!isspace(*s))
+ return -1;
+ s = skip_spaces(s);
part = dectoul(s, &s);
sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1);
diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c
index cc7e45ba33..361a3ff8af 100644
--- a/drivers/dfu/dfu_ram.c
+++ b/drivers/dfu/dfu_ram.c
@@ -60,11 +60,12 @@ int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, char *s)
const char **parg = argv;
for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) {
- *parg = strsep(&s, " ");
+ *parg = strsep(&s, " \t");
if (*parg == NULL) {
pr_err("Invalid number of arguments.\n");
return -ENODEV;
}
+ s = skip_spaces(s);
}
dfu->dev_type = DFU_DEV_RAM;
diff --git a/drivers/dfu/dfu_sf.c b/drivers/dfu/dfu_sf.c
index b72493ced8..993e951bc3 100644
--- a/drivers/dfu/dfu_sf.c
+++ b/drivers/dfu/dfu_sf.c
@@ -13,6 +13,7 @@
#include <spi_flash.h>
#include <jffs2/load_kernel.h>
#include <linux/mtd/mtd.h>
+#include <linux/ctype.h>
static int dfu_get_medium_size_sf(struct dfu_entity *dfu, u64 *size)
{
@@ -178,11 +179,14 @@ int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr, char *s)
dfu->dev_type = DFU_DEV_SF;
dfu->max_buf_size = dfu->data.sf.dev->sector_size;
- st = strsep(&s, " ");
+ st = strsep(&s, " \t");
+ s = skip_spaces(s);
if (!strcmp(st, "raw")) {
dfu->layout = DFU_RAW_ADDR;
dfu->data.sf.start = hextoul(s, &s);
- s++;
+ if (!isspace(*s))
+ return -1;
+ s = skip_spaces(s);
dfu->data.sf.size = hextoul(s, &s);
} else if (CONFIG_IS_ENABLED(DFU_SF_PART) &&
(!strcmp(st, "part") || !strcmp(st, "partubi"))) {
@@ -195,7 +199,9 @@ int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr, char *s)
dfu->layout = DFU_RAW_ADDR;
dev = dectoul(s, &s);
- s++;
+ if (!isspace(*s))
+ return -1;
+ s = skip_spaces(s);
part = dectoul(s, &s);
sprintf(mtd_id, "%s%d,%d", "nor", dev, part - 1);
next prev parent reply other threads:[~2021-12-06 5:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-06 5:44 [PATCH 0/5] DFU: Update dfu_alt_info parser etc Masami Hiramatsu
2021-12-06 5:44 ` [PATCH 1/5] DFU: Do not copy the entity name over the buffer size Masami Hiramatsu
2022-01-03 7:40 ` Ilias Apalodimas
2021-12-06 5:44 ` Masami Hiramatsu [this message]
2021-12-06 5:44 ` [PATCH 3/5] DFU: Check the number of arguments and argument string strictly Masami Hiramatsu
2021-12-06 5:45 ` [PATCH 4/5] doc: usage: DFU: Fix dfu_alt_info document Masami Hiramatsu
2021-12-06 5:45 ` [PATCH 5/5] cmd/dfu: Enable 'dfu list' command without DFU_OVER_USB Masami Hiramatsu
2022-01-28 16:29 ` Tom Rini
2022-01-31 0:05 ` Masami Hiramatsu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=163876948624.38238.2558454766729057172.stgit@localhost \
--to=masami.hiramatsu@linaro.org \
--cc=ilias.apalodimas@linaro.org \
--cc=jaswinder.singh@linaro.org \
--cc=lukma@denx.de \
--cc=sughosh.ganu@linaro.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox