* [U-Boot-Users] unable to get the data on the USB Bus
@ 2007-06-07 18:28 recklinux at gmail.com
0 siblings, 0 replies; only message in thread
From: recklinux at gmail.com @ 2007-06-07 18:28 UTC (permalink / raw)
To: u-boot
Hi I am using the ISP1562 on my PCI and using the OHCI code. I am able to reset and initialize the controller as i am able to see the reset signal and High speed chirp signal on the bus but there is no data on the bus. It shows the invalid packet on with all 0xFF at the first time i connect the mass storage device what could be the problem ?
How i have to map the PCI memory ?
I though that it could be the invalid memory access as i am taking the gohci and hcca structure by just taking it as an array and the controller HcHcca registers are unable to access that location it 0x7ffa0000 in my case where my PCI memor is mapped at 0x80000000
Need some help
Regards
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-06-07 18:28 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-07 18:28 [U-Boot-Users] unable to get the data on the USB Bus recklinux at gmail.com
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox