From: Embedded <lists@optimcloud.com>
To: u-boot@lists.denx.de
Subject: Warning: eth0 MAC addresses don't match:
Date: Tue, 13 Feb 2024 03:06:09 +0000 [thread overview]
Message-ID: <1707793391213.2198684831.3775960691@optimcloud.com> (raw)
We are trying to move a board from QSDK to OpenWRT, however, once we had
the image built and flashed bootipq exited with
Net: MAC0 addr:44:d1:fa:a4:f1:66
PHY ID1: 0x4d
PHY ID2: 0xd101
EDMA ver 1 hw init
Num rings - TxDesc:1 (0-0) TxCmpl:1 (0-0)
RxDesc:1 (15-15) RxFill:1 (7-7)
ipq6018_edma_alloc_rings: successfull
ipq6018_edma_setup_ring_resources: successfull
ipq6018_edma_configure_rings: successfull
ipq6018_edma_hw_init: successfull
, eth0
Warning: eth0 MAC addresses don't match:
Address in SROM is 44:d1:fa:a4:f1:66
Address in environment is 44:d1:fa:a4:f1:67
and printenv shows
IPQ6018# printenv
baudrate=115200
bootargs=console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs
rootfstype=squashfs rootwait ubi.mtd=rootfs root=mtd:ubi_rootfs
rootfstype=squashfs rootwait ubi.mtd=rootfs root=mtd:ubi_rootfs
rootfstype=squt
bootcmd=bootipq
bootdelay=2
eth1addr=44:d1:fa:a4:f1:67
eth2addr=44:d1:fa:a4:f1:68
eth3addr=44:d1:fa:a4:f1:69
eth4addr=44:d1:fa:a4:f1:6a
ethact=eth0
ethaddr=44:d1:fa:a4:f1:66
fdt_high=0x48500000
fdtcontroladdr=4a46e7d0
flash_type=7
fsbootargs=ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs
ipaddr=192.168.10.10
machid=8030000
mtddevname=fs
mtddevnum=0
mtdids=nand0=nand0
mtdparts=mtdparts=nand0:0x3c00000@0x0(fs),
netmask=255.255.255.0
partition=nand0,0
serverip=192.168.10.1
soc_version_major=1
soc_version_minor=0
stderr=serial@78B1000
stdin=serial@78B1000
stdout=serial@78B1000
Environment size: 887/65532 bytes
SO how can i resolve booting this device?
--
Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com
reply other threads:[~2024-02-13 11:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1707793391213.2198684831.3775960691@optimcloud.com \
--to=lists@optimcloud.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox