From: Hebbar <gururajakr@sanyo.co.in>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH] Remove gaps and whitespaces in README file
Date: Tue, 20 May 2008 02:25:00 -0700 (PDT) [thread overview]
Message-ID: <17336468.post@talk.nabble.com> (raw)
Hi,
Remove gaps and whitespaces in README file
Here in my company i cannot use git and hence no git-patch or git-mail. Will
see if i can convince them to allow git. sorry till then
Regards
Gururaja
Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
diff -purN u-boot-1.3.3/README u-boot-1.3.3-modified/README
--- u-boot-1.3.3/README 2008-05-19 03:47:11.000000000 -0700
+++ u-boot-1.3.3-modified/README 2008-05-20 13:58:47.656250000 -0700
@@ -180,15 +180,15 @@ Directory Hierarchy:
- dtt Digital Thermometer and Thermostat drivers
- examples Example code for standalone applications, etc.
- include Header Files
-- lib_arm Files generic to ARM architecture
-- lib_avr32 Files generic to AVR32 architecture
-- lib_generic Files generic to all architectures
-- lib_i386 Files generic to i386 architecture
-- lib_m68k Files generic to m68k architecture
-- lib_mips Files generic to MIPS architecture
-- lib_nios Files generic to NIOS architecture
+- lib_arm Files generic to ARM architecture
+- lib_avr32 Files generic to AVR32 architecture
+- lib_generic Files generic to all architectures
+- lib_i386 Files generic to i386 architecture
+- lib_m68k Files generic to m68k architecture
+- lib_mips Files generic to MIPS architecture
+- lib_nios Files generic to NIOS architecture
- lib_ppc Files generic to PowerPC architecture
-- lib_sparc Files generic to SPARC architecture
+- lib_sparc Files generic to SPARC architecture
- libfdt Library files to support flattened device trees
- net Networking code
- post Power On Self Test
@@ -608,7 +608,7 @@ The following options need to be configu
CONFIG_CMD_NAND * NAND support
CONFIG_CMD_NET bootp, tftpboot, rarpboot
CONFIG_CMD_PCI * pciinfo
- CONFIG_CMD_PCMCIA * PCMCIA support
+ CONFIG_CMD_PCMCIA * PCMCIA support
CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network
host
CONFIG_CMD_PORTIO * Port I/O
@@ -618,7 +618,7 @@ The following options need to be configu
CONFIG_CMD_SCSI * SCSI Support
CONFIG_CMD_SDRAM * print SDRAM configuration information
(requires CONFIG_CMD_I2C)
- CONFIG_CMD_SETGETDCR Support for DCR Register access
+ CONFIG_CMD_SETGETDCR Support for DCR Register access
(4xx only)
CONFIG_CMD_SPI * SPI serial bus support
CONFIG_CMD_USB * USB support
@@ -1697,14 +1697,14 @@ The following options need to be configu
Legacy uImage format:
- Arg Where When
+ Arg Where When
1 common/cmd_bootm.c before attempting to boot an image
- -1 common/cmd_bootm.c Image header has bad magic number
+ -1 common/cmd_bootm.c Image header has bad magic number
2 common/cmd_bootm.c Image header has correct magic number
- -2 common/cmd_bootm.c Image header has bad checksum
+ -2 common/cmd_bootm.c Image header has bad checksum
3 common/cmd_bootm.c Image header has correct checksum
- -3 common/cmd_bootm.c Image data has bad checksum
- 4 common/cmd_bootm.c Image data has correct checksum
+ -3 common/cmd_bootm.c Image data has bad checksum
+ 4 common/cmd_bootm.c Image data has correct checksum
-4 common/cmd_bootm.c Image is for unsupported architecture
5 common/cmd_bootm.c Architecture check OK
-5 common/cmd_bootm.c Wrong Image Type (not kernel, multi)
@@ -1716,11 +1716,11 @@ Legacy uImage format:
-9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX)
9 common/image.c Start initial ramdisk verification
- -10 common/image.c Ramdisk header has bad magic number
- -11 common/image.c Ramdisk header has bad checksum
+ -10 common/image.c Ramdisk header has bad magic number
+ -11 common/image.c Ramdisk header has bad checksum
10 common/image.c Ramdisk header is OK
- -12 common/image.c Ramdisk data has bad checksum
- 11 common/image.c Ramdisk data has correct checksum
+ -12 common/image.c Ramdisk data has bad checksum
+ 11 common/image.c Ramdisk data has correct checksum
12 common/image.c Ramdisk verification complete, start loading
-13 common/image.c Wrong Image Type (not PPC Linux Ramdisk)
13 common/image.c Start multifile image verification
@@ -1762,7 +1762,7 @@ Legacy uImage format:
48 common/cmd_ide.c reading Image Header from IDE device OK
-49 common/cmd_ide.c Image header has bad magic number
49 common/cmd_ide.c Image header has correct magic number
- -50 common/cmd_ide.c Image header has bad checksum
+ -50 common/cmd_ide.c Image header has bad checksum
50 common/cmd_ide.c Image header has correct checksum
-51 common/cmd_ide.c Error reading Image from IDE device
51 common/cmd_ide.c reading Image from IDE device OK
http://www.nabble.com/file/p17336468/uboot-1.3.3-README_remove_whitespace.diff
uboot-1.3.3-README_remove_whitespace.diff
--
View this message in context: http://www.nabble.com/-PATCH--Remove-gaps-and-whitespaces-in-README-file-tp17336468p17336468.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
next reply other threads:[~2008-05-20 9:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-20 9:25 Hebbar [this message]
2008-05-20 9:32 ` [U-Boot-Users] [PATCH] Remove gaps and whitespaces in README file Wolfgang Denk
2008-05-20 9:36 ` Hebbar
2008-05-20 12:29 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17336468.post@talk.nabble.com \
--to=gururajakr@sanyo.co.in \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox