[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances

["Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>]

Hi Albert,

On Sunday, May 19, 2013 1:48:11 PM, Albert ARIBAUD wrote:
> This series replaces all instances of relocate_code in
> various start.S files from the ARM architecture with a
> single instance in arch/arm/lib/relocate.S.
> 
> This is done in steps, each step keeping the whole of ARM
> U-Boot buildable and runnable and touching as little code
> as necessary.
> 
> 1. Drop mx31pdk SPL call to relocate_code
> 
> In SPL of mx31pdk, board_init_f calls relocate_code to
> move SPL from the NAND read buffer to SRAM. This move
> is not a relocation and is thus better implemented as
> a simple ad hoc copy loop.
> 
> 2. Drop tx25 SPL call to relocate_code
> 
> Same as mx31pdk.
> 
> 3. Prevent all SPLs from assembling relocate_code
> 
> Now that no SPL uses relocate_code any more, remove
> it completely from SPL builds by putting it entirely
> between #ifndef CONFIG_SPL_BUILD and #endif preprocessor
> conditional.
> 
> 4. Actual factorization of relocate_code
> 
> Remove all instances of relocate_code from start.S and
> create a new file, arch/arm/lib/relocate.S, to provide
> the new single instance of relocate_code.
> 
> The only non-trivial change is that for PXA25X, a call
> to unlock (actually disable) dcache is moved from before
> relocating to after relocating. As this cache is either
> locked-as-RAM or disabled, but never used as actual DDR
> cache, this move has no performance effect on relocation
> and no functional impact either.
> 
> The relocation routine was step-tested on versatileqemu
> under gdb. Especially, both relocation offset (from
> _start to addr_moni and local offsets (from relocate_code
> to several linker script symbols) have been verified.
> 
> Changes in v4:
> - added blank line after PXA25X conditional code
> - fixed typos in relocate_code comments
> - brought back 'mov pc,lr' instead of 'bx lr' for ARMv4

[...]

Perfect!

For this v4 series:
Reviewed-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>

Best regards,
Beno?t