[PATCH v2 0/3] sunxi: OrangePi Zero 2: Ethernet support

["Jernej Škrabec" <jernej.skrabec@siol.net>]

Dne sreda, 27. januar 2021 ob 02:06:35 CET je Andre Przywara napisal(a):
> The first two patches prepare the sun8i-emac driver to deal with the
> EMAC as integrated into the H616 SoC. This IP block is compatible with
> the A64 version, but the current driver prevents us from using that:
> - The EPHY syscon register needs to have a bit cleared to select the
>   external PHY. On the A64 it is cleared on reset, but we should not
>   rely on that. The Linux driver does so as well. Fixed in patch 1/3.
> - The pinmux setting is tied to the compatible string, but the H616
>   requires a different value. Fixed in patch 2/3.
> 
> The final patch enables Ethernet support for the OrangePi Zero 2 board,
> which now works without further ado.

This is cleaner and works for me, so for the whole series:
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>

Thanks!

Best regards,
Jernej

> 
> Cheers,
> Andre
> 
> Andre Przywara (3):
>   net: sun8i-emac: Always clear syscon EPHY register
>   net: sun8i-emac: Determine pinmux based on SoC, not EMAC type
>   sunxi: OrangePi Zero 2: Enable Ethernet
> 
>  configs/orangepi_zero2_defconfig |  2 ++
>  drivers/net/sun8i_emac.c         | 59 ++++++++++++++++++--------------
>  2 files changed, 35 insertions(+), 26 deletions(-)
> 
> -- 
> 2.17.5
> 
>