From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dirk Heinrichs Date: Sun, 13 Jan 2013 08:44:36 +0100 Subject: [U-Boot] Running vanilla u-boot v2012.10 on Guruplug In-Reply-To: <20130112204153.GC13433@titan.lakedaemon.net> References: <1457183.WG9k8kxG45@moria> <2223756.IMG4ajZrZq@moria> <20130112204153.GC13433@titan.lakedaemon.net> Message-ID: <1899176.CpK7lqz7e8@moria> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Am Samstag 12 Januar 2013, 15:41:54 schrieb Jason: > > Interesting that [1] states it's possible, though... > > With the dreamplug, I often load u-boot into RAM via the JTAG (0x0600000 > and 0x0800000), and then 'resume 0x0600000'. Then use the u-boot > running from 0x0600000 to burn the image to SPI flash from 0x0800000. > But that's loaded via the JTAG, not from a running u-boot. Yes, I do have a JTAG. And I have used openocd in the past to recover the plug, so I will try that method. > I think I posted instructions to this mailinglist a while ago about > this. If you have the JTAG (it's only $35US), I would advise trying > that. Yes, I've seen that, too. However, I've also seen the instructions for doing it from within u-boot in the link I posted. Since they didn't work I thought it might be bug. Never thought that it wasn't supported and not supposed to work at all :) Bye... Dirk -- Dirk Heinrichs Tel: +49 (0)2471 209385 | Mobil: +49 (0)176 34473913 GPG Public Key C2E467BB | Jabber: dirk.heinrichs at altum.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 190 bytes Desc: This is a digitally signed message part. URL: