From mboxrd@z Thu Jan  1 00:00:00 1970
From: Kumar Gala <kumar.gala@freescale.com>
Date: Sun, 16 Jan 2005 10:17:20 -0600
Subject: [U-Boot-Users] mpc4774
In-Reply-To: <007101c4faa5$a2054a20$c368a8c0@veriwavems2>
References: <007101c4faa5$a2054a20$c368a8c0@veriwavems2>
Message-ID: <18D97AD2-67DA-11D9-B3EA-000393DBC2E8@freescale.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dave,

Do you mean the MPC7447?  If so I would recommend look at 
http://www.kegel.com/crosstool/.  Also, ELDK (http://www.denx.de/) 
supports the 74xx architecture.

- kumar

On Jan 14, 2005, at 7:57 PM, Dave Laurin wrote:

> I would like to use u-boot for a mpc4774 and I am looking for the gnu
>  cross development tools to run on x86/linux.
>  If someone has already set them up I would appreciate a link to the
>  tools.
>  Thank you
>
>
>
>
> -------------------------------------------------------
>  The SF.Net email is sponsored by: Beat the post-holiday blues
>  Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
>  It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> U-Boot-Users mailing list
>  U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users